Flash Exposure; Cable Release - Yashica 635 User Manual

Selector
M X
Position
Bulb used M type F type
Shutter Any 1/60 or
Speed Speed slower
SELF-TIMER
To include yourself in the picture or for delayed action
shots, use the Self Timer and proceed as follows:
a. Advance the film by winding the Film Advance Knob.
b. Set the shutter speed, charge the shutter by pushing down
the Shutter Cocking Lever and move the Self-Timer Lever
all the way in the direction of the arrow.
c. Press the Shutter Release Button-- the shutter will be
tripped about 8 sec. Later.

CABLE RELEASE

The use of a cable release to trip the shutter will prevent
camera shake in close-up shots and long exposures.
Use a standard "screw-on" type cable release. Unscrew the
ring around the Shutter Release Button and set the cable
release securely over the Shutter Release Button. Consult
your dealer for the proper type of cable release.

FLASH EXPOSURE

Your Yashica 635 features built-in M-X synchronization. Set the
Synchro Selector to either M or X position, depending on the
type of flash in use. Then, plug the PC cord of your flash unit
into the Synchro Terminal.
Correct exposure setting for flash photography can be obtained
readily by referring to the guide number of the flash bulb o'
electronic flash. For color photography, use the proper type of
flash bulbs, or else, use color compensation filter.
Consult your dealer for the proper type of flash unit for your
camera.
X
Electronic Flash
Any Speed (When using slower Self-
timer)
4www.bu t kus. org