Yashica 635 User Manual page 11

FILM LOADING (35 mm film)
1. Pull out the 35mm Film Rewind Release Button
(R) and give it a slight twist in either direction.
2. Install the 35 mm Picture Frame by proceeding
as follows: After making sure that the sprocket
end of the frame is set toward the upper Film
Chamber, fit the spring bar into the lower edge,
and, while pushing the frame in the direction of
the arrow, install it properly into position.
3. Reset the 35 mm Film Rewind Release Button
to its original position by turning it in either
direction.
4. Screw the Spacer Ring on the threaded mount
around the right spool stud in the lower Film
Chamber.
1. 35 mm Take-up Spool
2. Sprocket Wheel
3. 35 mm Picture Frame
4. Pressure Plate Guide Socket
5. Pressure Plate
6. Spring Bar
7. 35 mm Film Leader
8. 35 mm Spool Stud Adapter
9. 35 mm Film Cassette
10. Spacer Ring
11. Pressure Plate Guide Pin