Table of Contents
Advertisement
Installation Instructions
Important Instructions!
Ensure there is sufficient air circulation around the device when
installing the JRex-IBOX. The ventilation openings must not be
obstructed.
Leave at least 5 cm (approx. 2".) of free space around the JRex-
IBOX to prevent the device from possibly overheating!
The voltage feeds must not be overloaded. Adjust the cabling and
the external overcharge protection to correspond with the
electrical data indicated on the type label.
The type label is located on the bottom side of the JRex-IBOX.
Leave sufficient space at the interface side for connecting the
peripheral devices.
JRex-IBOX – User's Manual
Installation Instructions
33
Advertisement
Table of Contents
