Table of Contents
Advertisement
Interfaces of the JFLEX-Communication1 Card
The JFLEX-Communication1 expansion card can be installed only on Level1 (L1)
of the JRex-IBOX (see fig. 1 )
Fig. 7: Interfaces of the JFLEX-Communication1 card
1 2x USB (1.1 or 2.0) interface connector
Note!
The USB version of these interfaces depend on the supported
USB interfaces version of the SBC card integrated into the JRex-
IBOX; refer to the table below!
2 FireWire interface connector (6-pin connector)
Note!
The attached peripheral devices must be self powered devices,
because the JRex-IBOX does not provide power to FireWire
devices!
3 2x LAN (10/100 Mbps) (RJ45 integrated LEDs)
Installed SBC Card
JRex-VE
JRex-VC
JRex-PM
JRex-CE
For detailed information and technical data refer to the user's
manual of the JFLEX-Communication1 card.
JRex-IBOX – User's Manual
1
2
supports USB1.1
)
)
)
)
Product Description
3
supports USB2.0
!
!
)
)
21
Advertisement
Table of Contents
