Table of Contents
Advertisement
Product Description
Interfaces of the JFLEX-SerialGPIO1 Card
The JFLEX-SerialGPIO1 expansion card can be installed only on Level1 (L1) of
the JRex-IBOX (see fig. 1).
1 COM2 interface connector
(RS232C)
2 COM3 interface connector
(RS232C)
3 COM4 interface connector
(RS232C)
If your JRex-IBOX is configured without the CAN interface, the
cut-out for this interface connector is covered.
JRex-IBOX configuration with installed JFLEX-SerialGPIO1
card (configured with the CAN interface) and JRex-CE-SBC
card, can not be configured also with the COM2 interface of the
SBC card.
For detailed information and technical data refer to the user's
manual of the JFLEX-SerialGPIO1 card.
20
5
4
3
Fig. 6: Interfaces of the JFLEX-SerialGPIO1 card
2
4 COM5 interface connector (RS485);
(as RS422 only by the factory
configurable)
5 CAN interface connector (optional)
JRex-IBOX – User's Manual
1
Advertisement
Table of Contents
