Kontron Embedded Computers JRex-IBOX User Manual page 13

Product Description
The different system configurations are integrated in the same chassis; three
different front panels (either as AC or DC version) are used (refer to the "Front
Panel and Configuration Variants" chapter):
q
Front panel for system configuration with JFLEX-Serial GPIO1
q
Front panel for system configuration with JFLEX-Communication1
q
Front panel for system configuration with JFLEX-Sound1
The LED indicators comprise the power LED and hard disk activity LED. These
LEDs inform about the status of the device. The operating element consists of the
AC or DC PSU "Power switch".
An integrated system fan ensures a proper air flow for system cooling.
The JRex-IBOX can be equipped with an AC or a DC power supply.
The system can be used as a rack-mount or desktop unit. The functionality of the
JRex-IBOX is ensured in each mounting-position.
The JRex-IBOX is suitable as stand-alone device for wall mounting or DIN-rail
mounting.
Fig. 2: JRex-IBOX with JFLEX-SerialGPIO1
(shown as AC version)
Fig. 3: JRex-IBOX with
JFLEX-Communication1
(shown as AC version)
Fig. 4: JRex-IBOX with JFLEX-Sound1
(shown as AC version)
12
When powering on the JRex-IBOX, make sure that the air
intake and exhaust openings are not obstructed.
Fig. 2a: JRex-IBOX with JFLEX-
SerialGPIO1 (shown as DC version)
Fig. 3a: JRex-IBOX with
JFLEX-Communication1
(shown as DC version)
Fig.4a: JRex-IBOX with JFLEX-Sound1
(shown as DC version)
JRex-IBOX – User's Manual