Starting Up; Power Cord Connection; Ac Connection - Kontron Embedded Computers JRex-IBOX User Manual

Starting Up

Starting Up

Power Cord Connection

The AC respectively DC power plug is located on the front side of the system.
The voltage of the power source must correspond to the
voltage value on the type label.

AC Connection

AC
On/Off switch
AC Power plug
Fig. 19: AC power connection
1. Connect the supplied AC power cord into the system AC power plug
(see fig. 19) .
2. Connect the other end of the AC power cord into a corresponding outlet.
Use a power cord suitable for the power supply in your country.
Make sure that the power supply (outlet) is properly grounded and
that the power cord is in perfect condition without any visible
damage. An ungrounded power supply is not permissible.
28
DC
On/Off switch
DC Power plug
Fig. 19a: DC power connection
JRex-IBOX – User's Manual