Advertisement
model number 060-2372-8 | contact us: 1.866.523.5218
If replacement of the supply cord is necessary, this has to be done by the manufacturer
or its agent in order to avoid a safety hazard.
CLEANING
Disconnect from electrical outlet. Using a soft brush remove debris from all air intakes and
cutting blade.
Wipe over surface of your Hedge Trimmer with a dry cloth.
WARNING! Never use water for cleaning your Hedge Trimmer. Do not clean with
!
chemicals, including petrol, or solvents as this can damage your Hedge Trimmer.
LUBRICATING THE CUTTING BLADE
For easier operation and longer life, lubricate the cutting blades before and after each use.
Before lubricating, make sure your Hedge Trimmer is disconnected from electrical outlet.
Apply the oil so that it runs between the two blades. (See Fig. G)
Your trimmer should be stopped, disconnected and oiled occasionally during use.
AT THE END OF THE CUTTING SEASON
Clean your Hedge Trimmer thoroughly.
Check that all nuts and bolts are secure.
Visually inspect the Hedge Trimmer for any worn or damaged parts.
TO STORE YOUR HEDGE TRIMMER
Store the Hedge Trimmer in a secure, dry place out of the reach of children. Do not place other
objects on top of the machine.
The trimmer is provided with 1 hanging slot for storing the trimmer on the wall. (See Fig. H).
Store in a dry place where your trimmer can be protected from damage.
E
G
F
H
15
Advertisement
