Primary-Secondary Set Up; Manual Focus - ADJ POCKET PRO User Manual

Pocket Pro
Primary-Secondary Operation. This function will allow you to link up to 16 units together and oper-
ate without a controller. The units will be sound activated. In Primary-Secondary operation one unit
will act as the controlling unit and the others will react to the controlling units programs. Any unit can
act as a Primary or as a Secondary.
1. Using approved DMX data cables, daisy chain your units together via the XLR connector on the
rear of the units. Remember the male XLR connector is the input and the Female XLR
connector is the output. The first unit in the chain (Primary) will use the female XLR connector
only. The last unit in the chain will use the male XLR connector only. For longer cable runs we
suggest the use of a terminator on the last unit.
2. On the Primary unit press the MENU button until "Pri/Sec Mode" is displayed, and press ENTER.
Use the UP and DOWN buttons to scroll to the "Pri" setting and press ENTER.
3. After setting the Primary unit to the primary setting find your desired operating mode.
4. On the secondary units press the MENU button until "Pri/Sec Mode" is displayed, and press
ENTER. Choose either "Sec 1" or "Sec 2" and press ENTER. See page 9 for more info.
5. The secondary units will now follow the Primary unit.
Pocket Pro
The focus can manually focused using the focus wheel located on the bottom front of the moving
head. Rotate the focus wheel back and forth until you get your perfect focus.
ADJ Products, LLC - www.adj.com - Pocket Pro User Manual Page 17

Primary-Secondary Set Up

Manual Focus