Set Up Instructions - ADJ ECO UV BAR 50 IR User Manual

S E T U P I N S T R U C T I O N S
INSTALLATION
This unit should be mounted using a mounting clamp (not provided), affixing it to the mounting
bracket that is provided with the unit. Always ensure that the unit is firmly fixed to avoid vibration
and slipping while operating. Always ensure that the structure to which you are attaching the unit is
secure and is able to support the weight of 10 times the unit's weight. A safety cable (optional) is
recommended when installing the fixture. It is recommended that a professional installs the
equipment and it must be installed in a place where it is out of the reach of people's grasp.
To install the mounting brackets:
1) With knob loose, adjust the width of the mounting bracket by moving the tab left/right.
2) Once positioned, secure the tab and tighten the knob by turning the knob clockwise.
3) Install the mounting bracket by lining up the mounting bracket with the mounting tab.
4) Secure the mounting bracket using the star knob and nut.
POWER CORD DAISY CHAIN
With this feature, you can connect the fixtures to one another using the IEC input and output
sockets. The quantity that can be connected is 20 fixtures maximum. After 20 fixtures you will need
to use a new power outlet.
Note: Do not mix features. The linked fixtures must be the same fixtures.
8