Symbols On The Product; Symbols On The Display - Gardena SILENO+ Operator's Manual

28. Extra blades
29. Low voltage cable
30. Alarm decal
31. USB cable for Software-Updates
3
32. smart Gateway
33. smart Gateway LAN-cable
34. smart Gateway Power Supply

1.3 Symbols on the product

These symbols can be found on the product. Study them
carefully.
WARNING: Read the user in-
structions before operating
the product.
WARNING: Disable the prod-
uct before working on or lift-
ing the product.
WARNING: Keep a safe dis-
tance from the product when
operating. Keep your hands
and feet away from the rotat-
ing blades.
WARNING: Do not ride on
the product. Never put your
hands or feet close to or un-
der the product.
Never use a high-pressure
washer or even running water
to clean the product.
Lock function.
Use a detachable power sup-
ply as defined on the rating
label next to the symbol.
This product conforms to the applicable
EC Directives.
3
Only for smart model.
4
Only for smart model.
5
Only for smart model.
1378 - 005 - 17.09.2020
4
5
It is not permitted to dispose this product
as normal household waste. Ensure that
the product is recycled in accordance with
local legal requirements.
The chassis contains components which
are sensitive to electrostatic discharge
(ESD). The chassis must also be resealed
in a professional manner. For these
reasons the chassis shall only be opened
by authorized service technicians. A
broken seal can result in the entire or
parts of the guarantee no longer being
valid.
The low voltage cable must not be
shortened, extended or spliced.
Do not use a trimmer nearby the low
voltage cable. Be careful when trimming
edges where the cables are placed.

1.4 Symbols on the display

The schedule menu is used to set when
the product cuts the lawn.
The security menu lets the operator select
between 3 security levels.
The SensorControl function automatically
adapts the cutting intervals to the grass
growth.
The installation menu is used for manual
settings for the installation.
The settings menu is used to set the
general product settings.
Introduction - 5