Download Print this page
Crestron UC-SB1-CAM Getting Started

Crestron UC-SB1-CAM Getting Started

Uc video conference smart soundbar & camera
Hide thumbs Also See for UC-SB1-CAM:

Advertisement

Quick Links

UC-SB1-CAM
UC Video Conference Smart Soundbar & Camera
Getting Started
Scan the QR code to view the Quick Start Guide.
www.crestron.com/docs/8605
For additional information, visit
www.crestron.com/model/6511281.
Certification and Compliance
Regulatory Model: UC-SB
This product is listed to applicable UL® Standards
and requirements tested by Intertek® services.
Ce produit est homologué selon les normes et les
exigences UL applicables par Intertek Prestations
de service.
Federal Communications Commission (FCC)
Compliance Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following conditions:
(1) This device may not cause harmful interference
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
l
Increase the separation between the equipment
l
and receiver.
Connect the equipment into an outlet on a
l
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
l
technician for help.
Industry Canada (IC) Compliance Statement
CAN ICES-3 (B)/NMB-3(B)
Product Information - 8602A
(2055068)
01.20

Advertisement

loading

Summary of Contents for Crestron UC-SB1-CAM

  • Page 1 UC-SB1-CAM UC Video Conference Smart Soundbar & Camera Getting Started This product is listed to applicable UL® Standards against harmful interference in a residential and requirements tested by Intertek® services. installation. This equipment generates, uses and Scan the QR code to view the Quick Start Guide.
  • Page 2 Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. ©2020 Crestron Electronics, Inc.
  • Page 3 It can be placed on a surface beneath the room display(s) or mounted on a wall. In the Box UC-SB1-CAM, UC Video Conference Smart Soundbar & Camera Additional Items Anchor, Drywall, Plastic, 3/8 in. x 1/2 in. (2052565) Cable, USB 3.0, A - B, 6 ft (1.83 m) (2053077)
  • Page 4 Quick Start UC-SB1-CAM UC Video Conference Smart Soundbar & Camera Install The soundbar can be placed on a flat surface or mounted on a wall. The soundbar has the following dimensions. Place on a Flat Surface If the soundbar is to be placed on a flat surface, attach the included rubber feet to the bottom of the soundbar as shown.
  • Page 5: Mount On A Wall

    Quick Start UC-SB1-CAM UC Video Conference Smart Soundbar & Camera Mount on a Wall The soundbar includes anchors that are suitable for mounting it on sheetrock walls up to 1/2 in. (13 mm) thickness. Masonry and other materials may require additional installer-supplied mounting hardware.
  • Page 6 Quick Start UC-SB1-CAM UC Video Conference Smart Soundbar & Camera 2. Drill two pilot holes on each side of the center reference line as shown in the previous diagram. Each side should have one pilot hole drilled in each row of the template.
  • Page 7 Quick Start UC-SB1-CAM UC Video Conference Smart Soundbar & Camera 6. Place the wall bracket over the screws, and hand tighten the screws until the wall bracket is secured to the wall. 7. Route the cables through the cable cutout, and connect the cables as described in Connect.
  • Page 8 Quick Start UC-SB1-CAM UC Video Conference Smart Soundbar & Camera Connect Make the necessary connections as called out in the following diagram. Connect power last. Once all connections are made, pivot the soundbar up to the wall bracket until the soundbar locks into place.
  • Page 9: Operation

    Quick Start UC-SB1-CAM UC Video Conference Smart Soundbar & Camera Muting the microphone turns the center of the status bar red. Operation Status The front panel status bar illuminates to provide operational information. A green status bar indicates the volume level. Raising the volume increases the status bar's illumination.
  • Page 10: Additional Information

    Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.