Features Setup Page - PCchips M758LMR User Manual

M758LMR Mainboard User's Manual

Features Setup Page

This page sets some of the parameters for peripheral devices
connected to the system.
AMIBIOS SETUP – FEATURES SETUP
©1998 American Megatrends, Inc. All Rights Reserved
OnBoard FDC Enabled
OnBoard Serial PortA 3F8h/COM1
OnBoard IR Port Disabled
OnBoard Parallel Port 378h
Parallel Port Mode SPP
Parallel Port IRQ 7
Parallel Port DMA
OnBoard PCI IDE Both
Ultra DMA Support Disabled
OnBoard Audio/Modem
OnBoard LAN Enabled
USB Function Disabled
USB Function for DOS Disabled
OnBoard FDC Use this item to enable or disable the onboard
floppy disk drive interface.
OnBoard Serial Use this item to enable or disable the onboard
PortA COM1 serial port, and to assign a port address
OnBoard IR Port
Use this item to define the protocol for an
infrared port if you have installed an optional IR
port. The choices are IrDA and ASKIR.
Onboard Parallel Use this item to enable or disable the onboard
Port LPT1 parallel port, and to assign a port
address. The Auto setting will detect and
available address.
Parallel Port Mode Use this item to set the parallel port mode. You
can select SPP (Standard Parallel Port), ECP
(Extended Capabilities Port), EPP (Enhanced
Parallel Port), or ECP + EPP.
Parallel Port IRQ Use this item to assign either IRQ 5 or 7 to the
parallel port.
Parallel Port DMA
Use this item to assign a DMA channel to the
parallel port. The options are 0, 1 and 3.
30
N/A
Enabled
ESC : Quit
F1 : Help
F5 : Old Values (Shift)F2
F6 : Load Optimal values
F7 : Load Best performance values
 : Select Item
PU/PD/+/- : Modify
: Color