Pci / Plug And Play Setup Page - PCchips M758LMR User Manual

M758LMR Mainboard User's Manual

PCI / Plug and Play Setup Page

This page sets some of the parameters for devices installed on the
PCI bus and devices that use the system plug and play capability.
Plug and Play Enable this item if you are using an O/S that
supports Plug and Play such as Windows 95 or
Aware O/S
98.
Primary Graphics
This item indicates if the primary graphics
adapter uses the PCI or the AGP bus. The
Adapter
default PCI setting still lets the onboard display
work and allows the use of a second display
card installed in a PCI slot.
Allocate IRQ to If this item is enabled, an IRQ will be assigned
to the PCI VGA graphics system. You set this
PCI VGA
value to No to free up an IRQ.
Reserved Memory
This item lets you reserve a block of memory
for any device that requires it.
Size
Reserved Memory This item lets you set the address for any block
of memory that has been reserved.
Address
28