Advertisement
◦ 1. Primary Separator
Separates the incoming product from the air stream and uses cyclonic action to
•
send material down to the discharge system. The product, being heavier than
air, will fall down the tank towards
the airlock.
55" high X 19" diameter.
•
Where gaskets are not available
•
use silicon to seal between
components in order to maintain
a constant vacuum.
The Primary Separator is bolted onto the
•
top of the airlock.
The Primary Separator is equipped with
•
two ports.
◦ The port on the top has a diameter of
6" and will lead to the Secondary
Separator.
◦ The suction lines connect to the 4"
side port.
Advertisement
