is put into place in order to prevent static
electricity build up.
Mounting Brackets
•
The mounting brackets are mounted to the wall
•
or to any other solid support.
The saddle clamps are attached to the
•
mounting brackets.
brackets.
Tighten the nuts evenly to prevent any incidents of piping separation or falling.
•
Compression Coupling
•
These are used to join all the piping together.
•
They consist of a three bolt compression
clamp, black gasket, and a grounding strip.
In order to fully function, the clamp must
•
be fully tightened for maximum clamping
force.
Ground strip
•
Saddle Clamps
•
Saddle clamps consist of two parts; a
•
"saddle" and a u-bolt, and are used to
attach the piping system to mounting