Tube Hangers
•
Tube hangers are an effective way to hang the piping
•
system from the beams running along the roof.
Consists of a Top Beam Clamp, a rod, and a hanger
•
properly sized to the piping.
Has a static wire built into it to prevent static electricity build up.
•
If servicing a rubber hose, ensure that the ground wire is making contact with
•
the coupling.
After the service, the installer must check the resistance by using an OHM
•
meter on the couplings while they are in contact with each other.
The conductivity of the coupling should read between 0 and 5 ohms
•
resistance.
Also available as a clear hose.
•
Rubber Flex Line
•
Rubber flex line is used
•
on the suction end of the
central vac system, and
is used for by the
operator.