D-Link DCS-4612EK User Manual page 56

Section 3: Configuration
Motion Alarm
DCS-4618EK
On this page you can configure an alarm to trigger when motion is detected
in the camera's display. Click and drag on the screen to determine the area
to monitor for motion.
Enable Click this to activate the motion detection alarm.
Alarm Interval Set the alarm interval in seconds.
Sensitivity
Set the motion detection sensitivity. A higher number indicates greater
sensitivity.
SD Card/Email/
Toggle these to send a snapshot via email or FTP or record video on the
FTP
inserted microSD card. Click the blue square at the bottom of the screen for
schedule setting.
Show motion
Toggle this to display motion detection alarms on the connected NVR.
detection on
NVR
Click the blue square on the bottom of the screen to schedule the motion
alarm.
D-Link Vigilance H.265 Outdoor Bullet Camera User Manual 56