D-Link DCS-4612EK User Manual page 55

Section 3: Configuration
Event Management / SD Card
On this page you can configure your camera to record video to an inserted microSD card. Click Format to format the SD card
(note that this will overwrite all current data on the card). Click Schedule Record to only save footage at set times. Click the blue
square at the bottom of the screen and then click the schedule to indicate when you would like recordings to be stored. Click
Save to save your recordings from the microSD card.
Schedule Toggle this to enable scheduled recording.
Record
Post-Event This setting allows you to set the length of time to delay before taking a
Record
post-event snapshot. You can enter a value between 1 and 86400 seconds.
Record Rule
Indicate whether the camera should continuously record and overwrite old
data (Cycle Store) or save video for a set number of days (Save Days). If this
option is selected, enter the number of days in the field below.
Stream Name
Select the stream to record.
Scheduled
Click the schedule at the bottom to specify a schedule to enable motion
Motion
detection.
Detection
D-Link Vigilance H.265 Outdoor Bullet Camera User Manual
DCS-4618EK
55