D-Link DCS-4612EK User Manual page 28

Section 3: Configuration
Step 1: Configure LAN Settings
DHCP Select this connection if you have a DHCP server running on your network
and would like your camera to obtain an IP address automatically.
If you choose DHCP, you do not need to fill out the IP address settings.
IP Address Enter the fixed IP address in this field.
Subnet Mask This number is used to determine if the destination is in the same subnet.
The default value is 255.255.255.0.
Default Enter the gateway used to forward frames to destinations in a different
Gateway subnet. Invalid gateway settings may cause the failure of transmissions to
a different subnet.
Default Router Enter the IP address of the default router.
Primary DNS
Enter the primary domain name server for translating domain names to IP
addresses.
MTU (1280- Enter the maximum transmission unit. The default value is 1500.
1500)
D-Link Vigilance H.265 Outdoor Bullet Camera User Manual 28