Care And Maintenance; General Care; Rust And Corrosion; Textile Deterioration - Vuly Quest Large Manual

1.0. Care and maintenance

Improper maintenance or lack of care can lead to your system deteriorating earlier than expected and causing injury.
Please follow these instructions to ensure that your product lasts for as long as possible.

1.1. General care

• Retain this Manual.
• Inspect before and after each use.
• Replace any worn, deteriorated, defective or missing parts immediately and only through Vuly.
• Tighten all hardware, including elements that secure the system to the ground.
• Keep away objects that could damage textile components.
• Ensure that moving steel components remain well lubricated.
• Use only parts and accessories recommended by Vuly.
• Accessories and swing attachments are sold separately.

1.2. Rust and corrosion

• Be aware of, and check, areas that are particularly prone to rusting:
○ Places where water is easily trapped.
○ Hollow sections of steel (which can appear in good condition on the outside, while hiding rust on the inside).
○ Sections where steel components join together.
• Inspect the inside of all tubes every 6 months – as well as after rain – and remove any water from the inside surfaces.
• Use general-purpose grease on steel connection areas.
• Avoid cleaning steel components excessively; it may reduce the effectiveness of their protective coatings.

1.3. Textile deterioration

• Remove textile parts, and store them – in their original packaging – in a cool, dry and dark place when the system will be
unused for over 1 month. Prolonged exposure to UV sunlight can shorten the lifespan of textile materials.

1.4. Weather care

Components are susceptible to deterioration from use and environmental conditions – such as sunlight, rain, salt and heat – to
varying degrees. At the beginning of each season, and regularly during use:
• Check all nuts and bolts to ensure that they are securely fastened.
• Oil all metallic moving components.
• Check all coverings and bolts for sharp edges and remove when neccessary.
• Check all swing attachments, chains, ropes and other mechanisms for deterioration, and replace when neccessary.
• If you any components are showing signs of rust or deterioration, please contact Vuly to acquire replacement parts.
Ensure that these checks are carried out to ensure the safety of this system.
If your system will be unused for any extended period, disassemble it, return it to its original packaging and store it in a dry place.
4