Vuly Quest Large Manual page 15

15
STEP
Insert the Long Shade Tube (L2) and
Short Shade Tube (L4) into the Large
T-Joiner as indicated below.
Important:
You must
attach the Shade Tubes
as directed, otherwise the
Shade Cover will be very
difficult to fit.
16
STEP
A. Insert a Joiner Tube (F2) into the top of both Lower Outer Tubes (F3), and insert Feet (F5) into the bottom.
Note: Use the provided Allan key to align the Joiner Tube.
B. Insert a T-Joiner (C2) into the wider ends of both Upper Outer Tubes (F1).
C. Connect two pairs of completed parts from 16A and 16B together.
D. Repeat for the remaining 3 sets of Outer Tubes, Joiner Tubes and Feet.
F1
L4
Short
Shade
Tube
A.
Note: If you are finding it difficult to
fully insert the grub screw flipping the
Large T-Joiner might solve this.
C2
B.
L2
Long
Shade
Tube
Small tube ends facing this way
Long Shade Tube
F2
Short Shade Tube
F3
F5
15