Related Manuals for Ingersoll-Rand QM7 Series
Summary of Contents for Ingersoll-Rand QM7 Series
- Page 1 Form 04581377 Edition 3 October 2005 Fixtured In-Line DC Electric Nutrunner QM7 Series Maintenance Information Save These Instructions...
-
Page 2: General Instructions
Wipe clean the Spindle Assemblies with a clean, dry and lint-free rag. (Note: For offset tools, also separate offset gearbox) Work 2.5 cc of Ingersoll-Rand #222 grease into the inner diameter Disassemble spindle and gear case. of the Coupler (8). -
Page 3: Spindle Assembly
Assembly. Housing (3). Replace Step 6. with: Work 2.5 cc of Ingersoll-Rand grease 222 into the inner diameter of 6. Use an allen wrench to Insert three M8 Screws (4) through the the Coupler (8). holes in the mounting plate, through the holes in the Housing... - Page 4 14. Use snap ring pliers to install the Retaining Ring (14) into the back of Work 3 cc of IR #222 grease into the 2nd stage planet gears. Work the housing. 1.5 cc into the inner chamber of the Spindle Assembly (22). Work 4.5 15.
- Page 5 QM Series Wiring (Cable) Chart Connector Pin Wire color (Cable) Logic Connector Pin Black Gray Spare 1 Pink Spare 2 Brown Spare 4 Yellow Sine Orange Cosine Violet Spare 3 Green Ground Sense Blue Blue/White White White/Blue Motor Phase B Black Motor Phase C White...
- Page 6 Notes Form 04581377-Edition 3...
- Page 7 Notes Form 04581377-Edition 3...
- Page 8 Ingersoll-Rand © 2005 Company...
Need help?
Do you have a question about the QM7 Series and is the answer not in the manual?
Questions and answers