Table of Contents
Advertisement
EN
8. Troubleshooting and repair
In the event of a malfunction of the device, return it to the manufacturer for repair. Clean the device carefully and
pack it so that it is protected against impact. Return the device to the manufacturer, enclosing a return declaration
with a detailed description of the error/malfunction. If your device has come into contact with a hazardous
substance, also enclose a declaration of decontamination. The relevant templates can be downloaded from our
homepage at www.beko-technologies.com. If your device arrives at our service workshop without a declaration
of decontamination, and should our personnel be concerned about any media with which it might have come into
contact, we will contact you. A repair will only be performed after we have received the relevant declaration of
decontamination. If the device has been exposed to a hazardous substance, take all necessary safety precautions
when cleaning it!
9. Decommissioning
To decommission the device, proceed as follows:
2
10. Dismantling and disposal
Dispose of the device according to the European Directives 2002/96/EC and 2003/108/EC (waste electrical and
electronic equipment (WEEE)). Never dispose of it with normal household waste!
If the device has been in contact with a hazardous substance, it might need to be disposed of through a specialist
hazardous waste disposal contractor!
BEKOMAT
3/6 CO Ex, 3/6 E Ex
®
4
TEST
1
3
Installation and operating manual
1. Close the upper condensate inlet
2. Press the TEST button
manually.
3. Close the lower condensate inlet
4. Open the manual drain
5. Disconnect the BEKOMAT
power supply.
1
.
4
to drain the system
2
.
3
.
from the electric
®
25
Hide quick links:
Advertisement
Table of Contents
