Table of Contents
Advertisement
Installation and operating manual
4. Electrical installation
4.1. Installation instructions
DANGER
Insufficient qualification
Improper handling and operation of the unit can result in serious or even fatal injury, and/or
damage to property.
•
•
DANGER
Risk of explosion
Risk to life from explosion, flash fire or combustion
•
•
DANGER
Mains voltage
Risk of serious or even fatal injury from electric shock when coming into contact with non-
insulated, powered components.
•
•
•
Specialist technical personnel
1
Specialist technical personnel are persons who, due to their professional qualification and knowledge in the field
of measuring, control and pneumatic technology, and their knowledge of the applicable statutory regulations,
guidelines and standards are in a position to foresee potential dangers in relation to the use of the device and
who are qualified to perform the tasks described in this manual. Special operating conditions (e.g. aggressive
media) require additional knowledge. In addition, observe the requirements for "qualified persons" as laid down
in the Technical Rules on Operational Safety (TRBS). It is the responsibility of the plant owner to ensure that the
instructions in this manual are adhered to.
18
All tasks described in this installation and operating manual must be performed by
specialist technical personnel
Before carrying out any work with or on the device, all specialist technical personnel¹
must have read and understood the contents of this installation and operating manual.
Observe all applicable rules and regulations for all work on and with the unit, including
operation and maintenance
(e.g. ATEX, CENELEC, NEC, TRBS, national guidelines and regulations).
All statutory safety measures for potentially explosive atmospheres must be strictly
adhered to. Normal operation must only start after the effectiveness of the applied
explosion safety measures has been assessed.
For the electrical installation of the unit, adhere to all applicable regulations (e.g. VDE
0100 / IEC 60364).
B efore carrying out any maintenance work, de-energize the system.
All electrical work must be carried out by authorised specialist technical personnel
who meet the following criteria:
1
BEKOMAT
3/6 CO Ex, 3/6 E Ex
®
EN
only.
1
Hide quick links:
Advertisement
Table of Contents
