Electrical Connections - Beko BEKOMAT 3 E Ex Installation And Operating Manual

Installation and operating manual

4.3. Electrical connections

The unit must be connected to an intrinsically safe power supply as shown in the wiring diagram.
NOTE Information regarding intrinsically safe power supply
For more information regarding the intrinsically safe power supply, see accessories 7.4,
page 24. For additional information regarding the connection of the intrinsically safe power
supply, see separate installation and operating manual.
ALARM / TEST
TEST
NETZ / POWER
BEKO TECHNOLOGIES
www.beko-technologies.com
BEKOMAT ®
ALARM / TEST
TEST
NETZ / POWER
BEKO TECHNOLOGIES
www.beko-technologies.com
BEKOMAT ®
20
1. Loosen the screws of the electronics housing and remove the
4 x
housing cover.
1
2. Loosen the armoured conduit fittings
1
3. Feed the cable through the cable duct (armoured conduit fitting)
and connect it according to the wiring diagram 4.2, page 19. Then
screw in the armoured conduit fittings.
4 x
4. Mount the housing cover and tighten the screws.
1 .
BEKOMAT 3/6 CO Ex, 3/6 E Ex
®
EN