Table of Contents
Advertisement
With some problems, the dedicated indicator
flashes intermittently to indicate a malfunction and
the alarm code.
Problem and alarm code
You cannot activate the appliance.
The programme does not start.
The appliance does not fill with water.
•
The indicator
mittently.
•
The light related to the start button
flashes continuously.
The appliance does not drain the water.
•
The indicator
termittently.
•
The light related to the start button
flashes continuously.
The anti-flood device is on.
•
The indicator
termittently.
•
The light related to the start button
flashes continuously.
Malfunction of the water level detection
sensor.
•
The indicator
termittently.
•
The light related to the start button
flashes continuously.
Malfunction of the wash pump or the drain
pump.
•
The indicator
termittently.
•
The light related to the start button
flashes continuously.
18
flashes 1 time inter-
flashes 2 times in-
flashes 3 times in-
flashes 4 times in-
flashes 5 times in-
Possible cause and solution
•
Make sure that the mains plug is connected to the
mains socket.
•
Make sure that there is no damaged fuse in the fuse
box.
•
Make sure that the appliance door is closed.
•
Press the start button.
•
If the delay start is set, cancel the setting or wait for
the end of the countdown.
•
The appliance recharges the resin inside the water
softener. The duration of the procedure is approxi-
mately 5 minutes.
•
Make sure that the water tap is open.
•
Make sure that the pressure of the water supply is
not too low. For this information, contact your local
water authority.
•
Make sure that the water tap is not clogged.
•
Make sure that the filter in the inlet hose is not clog-
ged.
•
Make sure that the inlet hose has no kinks or bends.
•
Make sure that the sink spigot is not clogged.
•
Make sure that the interior filter system is not clog-
ged.
•
Make sure that the drain hose has no kinks or
bends.
•
Close the water tap.
•
Make sure that the appliance is correctly installed.
•
Make sure the baskets are loaded as instructed in
the user manual.
•
Make sure that the filters are clean.
•
Switch the appliance off and on.
•
Switch the appliance off and on.
Advertisement
Table of Contents
