Advertisement
14. Pre-Filter: Filter the compressed air input.
5.0 Maintenance
5.1 Routine Maintenance
Change Filter Elements (Minimally every 6 months)
Caution: Perform Element changes only when system is depressurized.
1. Unscrew the housing from the filter head and drain off any oil in the housing into a suitable
container.
2. Remove and discard the used element. Replace the element with a new one of the
appropriate grade.
3. Screw the housing back onto the filter head. Do not over tighten. Housing is sealed with an
o-ring, so gently hand-tighten.
5. Repeat this process for both filters.
5.2 Routine Maintenance Schedule
Daily
1. Check for air and nitrogen leaks. Tighten or re-tape fittings as necessary.
2. Check that the inlet pressure is within recommended operating range.
Weekly
1. Clean unit as necessary.
Every Six Months
1. Replace filter elements.
Producer: Zhuhai priman auto maintenance equipment co.,ltd
Add: Minghong industry base Lian'gang indutrial zone, zhuhai city, China 519090
Tel:86-756-7799055
Fax:86-756-6210996
Email:
zhpriman@zhpriman.com
Web: www.zhpriman.com
7
Advertisement
