Advertisement
NOTE: The filter bowls on the Pre-Filter assembly will accumulate water and oil when the
generator is in operation but drain automatically whenever the generator unit is powered
down or the filter housings are depressurized. It is recommended that the generator unit be
powered down when not in use to ensure filter bowls remain drained and conserve power/unit
life.
It is important that the filter elements are replaced on a regular basis (at least every 6
months) to prevent contaminates from entering the Unit.
4.0 Control Panel
4.1 Switch and Control Functions
1. Power switch: Turn on/off the unit
3. System pressure gauge: Indicate the compressed air input pressure
4. N2 pressure gauge: Indicates system nitrogen pressure.
5. Air Outlet: To the Air Inlet located on the Clip-on deflator&inflator
9. Compressed Air Inlet
10. Nitrogen Outlet: For external Nitrogen Storage Tank
11. Outlet: For tire fill hose
12. Power Cord
13. Pre-Filter& Regulator: Filter the compressed air input & Adjust the compressed air input
pressure
6
Advertisement
