Advertisement
1.1 This Manual
Congratulations on selecting the nitrogen tire inflation equipment. Please read and familiarize
yourself with this manual before attempting to use this unit. Although this unit is very simple
to operate, the user will be working with high-pressure gas that must be handled with caution.
Compressed gas, if handled improperly, can result in serious or fatal injury.
1.2 General Specifications *
Power Requirement
Operating Temperature
Compressed Air Input Range
Compressed Air Quality
Nitrogen Purity
Nitrogen Output
Maximum Nitrogen Pressure in Tank
*Note: Specifications may vary for non-standard equipment. Contact your service agent for
further information.
1.3 Safety
General
The unit has standard process plant components and electrical equipment, which can be
hazardous to individuals unfamiliar with such equipment. It is the users' responsibility to
permit only trained and qualified process plant operators familiar with the handling of
compressed gases to operate this equipment.
Breathing
This unit is designed to produce high purity nitrogen from 95 – 99+% purity. Nitrogen is a
colorless, odorless gas that will not support life. If released in an unventilated area, it will
displace the oxygen and can cause injury or death from asphyxiation.
CAUTION: Nitrogen gas represents an extreme asphyxiation hazard when not
handled properly. Product gas should not be vented or otherwise discharged
except through the normal piping system. Appropriate signs should be placed in
the area of the nitrogen system warning of the hazards.
2.0 Assembly
1. Unpack the carton and identify the components.
100/240Vac 50/60Hz
-20℃ to 70℃, -4°F to 158°F
145-217 psi/1000-1500kPa/10-15bar
0.01ppm
95-99+%
8.4cfm (236L/min)
@ 131psi/900kPa/9bar Absorption pressure
145-174psi/1000-1200kPa/10-12bar
3
Advertisement
