Download Print this page
Priman PN-8890 Owner's Manual

Priman PN-8890 Owner's Manual

Nitrogen tyre inflator

Advertisement

Quick Links

Nitrogen Tyre Inflator
Owner's Manual
Model:PN-8890
Please read this manual carefully before attempting assembly or use.
1

Advertisement

loading

Summary of Contents for Priman PN-8890

  • Page 1 Nitrogen Tyre Inflator Owner’s Manual Model:PN-8890 Please read this manual carefully before attempting assembly or use.
  • Page 2 ■ Suit for: Motorcycle, Car, Light Truck, Bus Manual Model Nitrogen Tyre Inflation System Operation Steps -Use your tyre inflation gun (supplied separately) tyre inflation gun 1.Connect air hose to your tyre inflation gun. 2.Lift the vehicle to avoid demage to the tyre due to the heavy vehicle weight.
  • Page 3 1.1 This Manual Congratulations on selecting the nitrogen tire inflation equipment. Please read and familiarize yourself with this manual before attempting to use this unit. Although this unit is very simple to operate, the user will be working with high-pressure gas that must be handled with caution. Compressed gas, if handled improperly, can result in serious or fatal injury.
  • Page 4 Description Quantity Generator Unit Hose with Couplers (1 meter/39 Inch) Tire Fill Hose Hose/Cord Storage Hook Storage Tank Base 2. Install the provided Hose/Cord Storage Hook onto the Unit with the screws provided. 3. If using an optional storage tank, install the Storage Tank Base to the main Base Frame with the provided hardware.
  • Page 5 3.0 Preparation for Use 1. Plug unit power cord into the power source. 2. Connect a compressed air supply line to the inlet located on the Pre-Filter. 3. Turn the unit on by depressing the power switch. The Unit will immediately begin to produce nitrogen.
  • Page 6 NOTE: The filter bowls on the Pre-Filter assembly will accumulate water and oil when the generator is in operation but drain automatically whenever the generator unit is powered down or the filter housings are depressurized. It is recommended that the generator unit be powered down when not in use to ensure filter bowls remain drained and conserve power/unit life.
  • Page 7 2. Check that the inlet pressure is within recommended operating range. Weekly 1. Clean unit as necessary. Every Six Months 1. Replace filter elements. Producer: Zhuhai priman auto maintenance equipment co.,ltd Add: Minghong industry base Lian'gang indutrial zone, zhuhai city, China 519090 Tel:86-756-7799055 Fax:86-756-6210996 Email: zhpriman@zhpriman.com...