Advertisement
■ Suit for: Motorcycle, Car, Light Truck, Bus
Manual
Inflation System Operation Steps
-Use your tyre inflation gun
1.Connect air hose to your tyre inflation gun.
2.Lift the vehicle to avoid demage to the tyre due to the heavy vehicle
weight.
3.Remove the tyre valve core to exhaust the residual air from the tyre.
4.Inflate the tyre to 0.5bar/7psi with the tyre pressure gauge, then deflate
this 0.5bar nitrogen, this can improve the tyre nitrogen purity.
5.Re-Fit tyre valve core.
6.Inflate the tyre to the target pressure with your tyre inflation gun.
-Use your Clip-on deflator&inflator
1.Connect 2pcs air hoses to your Clip-on deflator&inflator.
2.Lift the vehicle to avoid demage to the tyre due to the heavy vehicle
weight.
3.Remove the tyre valve core to exhaust the residual air from the tyre.
4.Re-Fit tyre valve core.
5.Pump the tyre about 10 seconds by the Clip-on deflator&inflator, this
can improve the tyre nitrogen purity.
6.Inflate the tyre to the target pressure by your Clip-on deflator&inflator.
1.0 Introduction
Model
tyre inflation gun
Net Weight
Nitrogen
(supplied separately)
(supplied separately)
Dimension
（
Height*Width*Depth
3.6kg/7.9lbs
2
Tyre
260mm*420mm*100m
10.2"*16.5"*3.9"
）
Advertisement
