English - Bang & Olufsen BeoPlay A8 Manual

8
For table placement, mount the
rear feet on your BeoPlay A8
and make sure the front feet
are mounted. For wall bracket
placement, remove all feet, see
'Maintenance'. If you do not
wish to use BeoPlay A8 with a
docked iPod ® /iPhone
replace the dock with the
enclosed lid.
Place BeoPlay A8 on a flat, stable
surface and connect it to the mains
supply. Your iPod/iPhone/iPad is
charged when docked.
As well as listening to audio stored
on your iPod/iPhone/iPad, you can
use your BeoPlay A8 to:
– Play audio directly from your app
using AirPlay
or iTunes* 1
– Connect and listen to an external
audio source, such as an MP3
player or music phone via line-in.
– Play audio stored or streamed on
your computer via USB.

English

® /iPad ®
Mount and dismount the dock
If you do not want to use the dock,
you must carefully lift it off. Insert
the enclosed lid to cover the gap.
To remove the lid, you must insert
a thin flat-headed instrument, such
as a screw driver, into the hole and
detach it. To avoid scratches, a
cloth can be wrapped around the
instrument while you insert it. Do
.
® not use force.
Adjust docking
You must adjust the part of the
docking station that supports your
iPod/iPhone/iPad by turning the
round part (left or right). Align the
front of the iPod/iPhone/iPad with
the front of BeoPlay A8.
Dock and undock
To dock and undock your iPod/
iPhone/iPad safely you must use a
parallel upwards or downwards
movement aligned with the part of
the docking station that supports
your device.
Adjust the part of the docking
station that supports your iPod/
iPhone/iPad.
Never use force and never tilt your
iPod/iPhone/iPad when you dock/
undock.
*iTunes version 10.1 (Mac or PC)
1
or higher is required.