Set Up Instruction - netvox R718N3 User Manual

4.Set up Instruction

On/Off
Insert batteries.
Power on
(users may need a flat blade screwdriver to open)
Turn on Press and hold the function key for 3 seconds till the green indicator flashes once.
Turn off
Press and hold the function key for 5 seconds till green indicator flashes for 20 times.
(Restore to factory setting)
Power off Remove Batteries.
1. Remove and insert the battery; the device is at off state by default.
2. On/off interval is suggested to be about 10 seconds to avoid the interference of capacitor inductance and other
Note:
energy storage components.
3. At 1
Network Joining
Turn on the device to search the network.
Never joined the network The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Turn on the device to search the previous network.
Had joined the network The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
First two mins: wake up every 15 seconds to send request.
After two mins: enter sleeping mode and wake up every 15 minutes to send request.
Fail to join the network
Note: Suggest to remove batteries if the device is not used to save power.
(when the device is on)
Function Key
Restore to factory setting / Turn off
Press and hold for 5
The green indicator flashes for 20 times: success
seconds
The green indicator remains off: fail
The device is in the network: green indicator flashes once and sends a report
Press once
The device is not in the network: green indicator remains off
Sleeping Mode
The device is on and in the Sleeping period: Min Interval.
network When the reportchange exceeds setting value or the state changes: send a data report according to Min Interval.
First two mins: wake up every 15 seconds to send request.
The device is on but not in After two mins: enter sleeping mode and wake up every 15 minutes to send request.
the network Note: Suggest to remove batteries if the device is not used.
Low Voltage Warning
Low Voltage 3.2V
st -5 th second after power on, the device will be in engineering test mode.
Suggest to check the device verification information on the gateway
or consult your platform server provider.
Suggest to check device verification on gateway.
4