Table of Contents
Advertisement
Available languages
Available languages
Precaution
On Safety
Operate the unit only with a power source as
specified in the "Specifications" section.
A nameplate indicating operating voltage, etc.,
is located on the bottom of the unit.
Should any solid object or liquid fall into the
cabinet, unplug the unit and have it checked by
qualified personnel before operating it any
further.
Do not drop or place heavy objects on the
power cord. If the power cord is damaged, turn
off the power immediately. It is dangerous to
use the unit with a damaged power cord.
Unplug the unit from the wall outlet if it is not
to be used for several days or more.
Disconnect the power cord from the AC outlet
by grasping the plug, not by pulling the cord.
The socket-outlet shall be installed near the
equipment and shall be easily accessible.
On Installation
Allow adequate air circulation to prevent
internal heat build-up.
Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation holes.
Do not install the unit in a location near heat
sources such as radiators or air ducts, or in a
place subject to direct sunlight, excessive dust,
mechanical vibration or shock.
When installing the installation space must be
secured in consideration of the ventilation and
service operation.
Do not block the ventilation slots on the side
and bottom of the unit.
Leave a space around the unit for ventilation.
Leave more than 10 cm (4 in.) of space in the
rear of the unit to secure the operation area.
When the unit is installed on the desk or the like,
leave at least 10 cm (4 in.) of space in the left and
right sides, 10 cm (4 in.) or more of space above
the unit.
Connecting to Other Devices
When connecting this unit to other devices, turn
off this unit and the other devices beforehand.
Connecting while turned on may cause a
malfunction to this unit and the other devices.
Handling the Screen
The LCD panel fitted to this unit is
manufactured with high precision technology,
giving a functioning pixel ratio of at least
99.99%. Thus a very small proportion of pixels
may be "stuck", either always off (black),
always on (red, green, or blue), or flashing. In
addition, over a long period of use, because of
the physical characteristics of the liquid crystal
display, such "stuck" pixels may appear
spontaneously. These problems are not a
malfunction.
Do not leave the screen facing the sun as it can
damage the screen. Take care when you place
the unit by a window.
Do not push or scratch the display's screen. Do
not place a heavy object on the display's
screen. This may cause the screen to lose
uniformity.
If the unit is used in a cold place, horizontal
lines or a residual image may appear on the
screen. This is not a malfunction. When the
display becomes warm, the screen returns to
normal.
The screen may become warm during
operation. This is not a malfunction.
On a Long Period of Use
Due to an LCD's panel structure and
characteristics of materials in its design,
displaying static images for extended periods, or
using the unit repeatedly in a high temperature/
high humidity environments may cause image
smearing, burn-in, areas of which brightness is
permanently changed, lines, or a decrease in
overall brightness.
In particular, continually displaying an image
smaller than the displaying area, such as an
image in a different aspect ratio or with a frame,
may expedite the above issues.
Avoid displaying a still image for an extended
period, or using the unit repeatedly in a high
temperature/high humidity environment such
an airtight room, or around the outlet of an air
conditioner.
To prevent any of the above issues, we
recommend reducing brightness slightly, and to
7
GB
Advertisement
Chapters
Table of Contents
