Table of Contents
Advertisement
Available languages
Available languages
turn off the power whenever the unit is not in
use.
On Dew Condensation
If the unit is suddenly taken from a cold to a
warm location, or if ambient temperature
suddenly rises, moisture may form on the outer
surface of the unit and/or inside of the unit. This
is known as condensation. If condensation
occurs, turn off the unit and wait until the
condensation clears before operating the unit.
Operating the unit while condensation is present
may damage the unit.
On Watching 3D Video Images
Some people may experience discomfort (such
as eye strain, fatigue, or nausea) while watching
3D video images or playing stereoscopic 3D
games. Sony recommends that all viewers take
regular breaks while watching 3D video images
or playing stereoscopic 3D games. The length
and frequency of necessary breaks will vary from
person to person. You must decide what works
best. If you experience any discomfort, you
should stop watching the 3D video images or
playing stereoscopic 3D games until the
discomfort ends; consult a doctor if you believe
necessary. You should also review (i) the
instruction manual of any other device or media
used with this product and (ii) our website
(http://www.sony.com/support) for the latest
information. The vision of young children
(especially those under six years old) is still under
development.
Consult your doctor (such as a pediatrician or eye
doctor) before allowing young children to watch
3D video images or play stereoscopic 3D games.
Adults should supervise young children to
ensure they follow the recommendations listed
above.
Handling and Maintenance of the Screen
The surface of the screen is specially coated to
reduce image reflection. Make sure to observe
the following points as improper maintenance
procedures may impair the screen's
performance. In addition, the screen is
vulnerable to damage. Do not scratch or knock
against it using a hard object.
8
GB
Do not throw anything at the display as the
impact can cause the screen glass to crack,
break, or scatter.
Be sure to disconnect the AC power cord from
the AC outlet before performing maintenance.
The surface of the screen is specially coated.
Do not attach adhesive objects, such as
stickers, on it.
The surface of the screen is specially coated.
Do not touch the screen directly.
Wipe the screen surface gently with the
supplied cleaning cloth to remove dirt.
Stubborn stains may be removed with the
supplied cleaning cloth slightly dampened
with a mild detergent solution.
The screen may become scratched if the
supplied cleaning cloth is dusty.
Never use strong solvents such as alcohol,
benzene, thinner, acidic or alkaline detergent,
detergent with abrasives, or chemical wipe as
these may damage the screen.
Use a blower to remove dust from the screen
surface.
On Transportation of the Unit
If the unit is transported or moved in a wrong
way, the unit may fall over and cause an injury
such as a bruise or fracture.
Hold the unit securely as seen in the following
illustration.
Do not press or put pressure on the screen
when holding the unit.
Disconnect the AC power cord and all cables
connected to the unit before transporting the
unit.
If the unit is transported with the AC power
cord connected, the AC power cord may be
damaged and cause a fire and electrical shock.
When transporting the unit for repair or
moving, pack the unit using the original carton
box and packing materials.
Do not subject the unit to severe vibration or
high impact conditions during transportation.
Doing so may result in deformation of the
internal structure or exterior of the unit,
Advertisement
Chapters
Table of Contents
