Sunlighten mPulse aSPIRE User Manual page 5

Hide thumbs Also See for mPulse aSPIRE:
Table of Contents

Advertisement

PRE-INSTALLATION
1. Have a certified electrician install a dedicated outlet for sauna.
Failure to do so will void all warranty.
2. Remember your sauna should be assembled by two or more people.
3. Do not place plumbing or plumbing fixtures in the sauna.
4. Keep all liquids away from the heating panels and electronics.
5. Install sauna on a level surface.
6. Install sauna in an area that is dry and protected from the weather.
7. Keep flammable objects and corrosive chemical substances away
from the sauna.
8. Installation of the sauna in an area below standard room temperature
can increase warm-up time.
WARNING
READ BEFORE OPERATING
To reduce risk associated with hazardous voltage & fire:
• Unplug the sauna from electrical outlet before storage or when not
in use for expanded periods of time.
• Do not operate the sauna if it's not on a dedicated electrical circuit,
or has a damaged power cord/plug.
• If the sauna is not working properly or an odor persists, immediately
unplug the sauna.
• Do not leave the sauna unattended while heating for longer than
the sauna's pre-set time periods.
• Never cover holes or floor grate with towels, mats, garments, etc.
5

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the mPulse aSPIRE and is the answer not in the manual?

Table of Contents