Titling Discs/Stations; Erasing Disc Title/Station Title; Displaying Time; Setting The Wallpaper - Alpine DVA-9860 Owner's Manual

Titling Discs/Stations

It is possible to title your favorite CD's or radio stations.
You cannot input titles for data discs containing MP3/WMAs, or
DVD and Video CD discs.
1
Press TITLE
and select the Title Display.
For details, see "Displaying the Title/Text" (page 19).
2
Press and hold TITLE
The first character will blink.
3
Turn the Rotary encoder to select the desired
letter/numeral/symbol available for naming.
4
Press the Rotary encoder to store the first
character.
The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next letter
or symbol of your title.
5
Repeat steps 3 and 4 above to complete the titling.
Pressing the Rotary encoder after entering the 8th
character automatically stores the title into memory.
When entering a title of less than 8 characters (for
example, 3 character title):
After entering 3 characters, the 4th character space will
be blinking. Go to step 6 to complete the title.
6
Press TITLE to record the title.
• If you cancel while entering a title, selected characters are not
written.
• You can enter 18 CD titles and 24 station titles on this unit. If you
try to store beyond the limit, the display will show "FULL DATA."
At this point, no more titles can be stored. To input a new title, one
of the previously inputted titles must first be deleted.
• When you want to erase a title, enter the "
spaces.
• The operations described in steps 3 to 5 must be made within 10
seconds. The input mode will be cancelled if no action is taken for
over 10 seconds.

Erasing Disc Title/Station Title

1
Press TITLE to select the Title Display. Then,
press again and hold for at least 2 seconds.
2
Press and hold -/J for at least 2 seconds.
The title in the display will blink.
3
Press g or f repeatedly until the title you
want to erase is displayed.
4
Press and hold -/J for at least 2 seconds to erase
the title displayed.
5
Press TITLE to cancel the title erasing mode.
• You cannot erase CD-TEXT.
• "NO DATA" is displayed for 2 seconds if the title is not input in
step 2, or if all titles are erased in step 4.
20
-EN
for at least 2 seconds.
" symbol into all

Displaying Time

Press TITLE repeatedly until the time is displayed.
Each press changes the display.
For details, see "Displaying the Title/Text" (page 19).
• Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
• When the power is off but the ignition key is on, press TITLE
display the time.

Setting the Wallpaper

A data file downloaded from the ALPINE Owner's website is written
to a CD-R/CD-RW disc, and automatically uploaded when the disc is
inserted into the DVA-9860.
The wallpaper file can be saved and displayed as long as a disc is not
inserted, or while playing a CD/MP3/WMA audio, or if a DVD disc is
stopped.
• If several files are stored in a disc, only the first file will be stored
on the unit.
Insert a CD-R/CD-RW disc containing data.
After sensing the disc, the data file is updated.
• Up to 2 files can be stored on this unit. If a third file is
downloaded, the first file is overwritten and new one memorized.
• To change the wallpaper, press and hold ENT. on the remote
control unit for at least 2 seconds while disc is not inserted, or
while PRE-STOP or STOP is set in disc mode.
• Even if the battery power cable is removed, the downloaded data is
not cleared.
to