Creating A Bootable Usb Memory Drive - NCR POS XR8 User Manual

8-122

Creating a Bootable USB Memory Drive

The downloaded file contains the files necessary to create a bootable USB Memory
Drive.
1. Insert a USB drive that is formatted as FAT (or FAT32).
2. Unzip the downloaded files.
3. Copy the files to the root directory of the USB drive.
4. Open a DOS command window.
5. Change directory to the USB Memory Drive.
6. Execute the following command:
Syslinux -fma <USB drive letter>
Example:
Syslinux -fma f:
This command erases any bootable methods that may be present on the USB drive
and replaces it with the SPI/BIOS update process.
If the resulting USB memory drive is not bootable, try the following command. This
runs slower but is more effective.
Syslinux -sfma <USB drive letter>
Important: Do not run syslinux by double-clicking on it because it may affect the
boot drive of the terminal being used to create the drive.
Windows 7 Note: The above commands must be executed as administrator. Failure
to run as administrator results in an MSR write failure. To open a command shell
with administrator privileges perform the following:
Start All Programs
→
"Run as"
[right-click]
Accessories Command Prompt
→ →
Administrator
→
BIOS Updating Procedure
→