HRT Huddle Hub One Quick Start Manual

Quick Start Guide
1
2
www.hrt.website
macOS
3
4
Start Session
Start Presentation
Start Multicam feed
Last updated: 18 Dec 2017. Technical specifications are subject to change without prior notice. Please check www.hrt.website for the latest information.
Copyright © HRT 2017 Huddle Hub, the HRT logo and other HRT marks are owned by HRT and may be registered. All other trademarks are the properties of their respective owners.
Distribution:
PureLink GmbH
CONNECT TO ADMIN PAGES
Admin page Url:
POWER PLUG The IP address of Huddle Hub One depends on your company LAN
address family (e.g. 192.168.1.x), on your DHCP server and in general
on your network configuration. Ask your network administrator for
the IP address of your Huddle Hub One.
ETHERNET LAN Admin page password:
Please note:
At the first start, Huddle Hub One takes a few minutes to update
firmware and configure itself. During this time the system is not available.
www.hrt.website
ACCESS VIA COMPANY LAN
1. Connect your device to the same company
LAN you connected the hub to
2. Launch the Huddle Hub App
Launch the app, click the 9 dots icon (Status Bar on MacOS or
Tray Bar on MS Windows), and click on "HuddleHubOne".
Please note: a Passcode may be required.
Click on "Present" to start presenting your screen.
Please note: only Desktop Apps (MacOS and Windows) can be
presenter.
Click on "Start multicam feed" and select the Huddle Hub
video driver in your video conference app.
Available from B2B Online Portal
Setup and configuration
password
Download the apps
App Store
Connect devices
Run a session
camera:
Huddle Hub
Google Play