Table of Contents
Advertisement
66 GETTING TO KNOW YOUR INSTRUMENT PANEL
Green Indicator Lights
Turn Signal Indicator Lights
The turn signal arrows will flash independently
when left or right turn signals are selected. Turn
signals can be activated when the multifunction
lever is moved down (left) or up (right).
Park/Headlight On Indicator Light
This indicator light will illuminate when the park
lights or headlights are turned on.
Cruise Control Set Indicator Light — If Equipped
This indicator light will illuminate when the cruise
control is set to the desired speed. Refer to "Speed
Control" in "Starting And Operating" for further
information.
Door Mirror Defrost Indicator Light
This indicator will illuminate when the Door Mirror
Defrost button on the instrument panel is pushed to
the on position.
Blue Indicator Lights
High Beam Indicator Light
This indicator light will illuminate to indicate that
the high beam headlights are on. With the low
beams activated, push the multifunction lever
forward (toward the front of the vehicle) to turn on the high
beams. Pull the multifunction lever rearward (toward the
rear of the vehicle) to turn off the high beams. If the high
beams are off, pull the lever toward you for a temporary high
beam on, "flash to pass" scenario.
ONBOARD DIAGNOSTIC SYSTEM — OBD II
Your vehicle is equipped with a sophisticated onboard diag-
nostic system called OBD II. This system monitors the
performance of the emissions, engine, and Alfa Twin Clutch
Transmission control systems. When these systems are oper-
ating properly, your vehicle will provide excellent perfor-
mance and fuel economy, as well as engine emissions well
within current government regulations.
If any of these systems require service, the OBD II system
will turn on the "Malfunction Indicator Light (MIL)". It will
also store diagnostic codes and other information to assist
your service technician in making repairs. Although your
vehicle will usually be drivable and not need towing, see an
authorized dealer for service as soon as possible.
CAUTION!
• Prolonged driving with the MIL on could cause further
damage to the emission control system. It could also
affect fuel economy and driveability. The vehicle must
be serviced before any emissions tests can be
performed.
• If the MIL is flashing while the vehicle is running,
severe catalytic converter damage and power loss will
soon occur. Immediate service is required.
Advertisement
Table of Contents
