Hide thumbs Also See for 2015 4C:
Table of Contents

Advertisement

Quick Links

4C
2 0 1 5
O W N E R ' S M A N U A L

Advertisement

Table of Contents
loading

Summary of Contents for Alfa Romeo 2015 4C

  • Page 1 2 0 1 5 O W N E R ’ S M A N U A L...
  • Page 2 VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of Chrysler Group LLC shall be deemed to be deleted and the features and equipment that are either standard or op- name Chrysler Canada Inc.
  • Page 3: Introduction 3

    TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. . . 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
  • Page 5: Table Of Contents

    INTRODUCTION CONTENTS INTRODUCTION ......4 VEHICLE IDENTIFICATION NUMBER ..7 HOW TO USE THIS MANUAL ....5 VEHICLE MODIFICATIONS/ALTERATIONS .
  • Page 6: Introduction

    4 INTRODUCTION INTRODUCTION The enclosed Warranty Information lists the services that FIAT Group Automobiles offers to its customers: Congratulations on selecting your new vehicle. Be as- • The Warranty Certificate with terms and conditions for sured that it represents precision workmanship, distinc- tive styling, and high quality - all essentials that are maintaining its validity traditional to our vehicles.
  • Page 7: How To Use This Manual

    INTRODUCTION 5 HOW TO USE THIS MANUAL Consult the Table of Contents to determine which section contains the information you desire. Since the specification of your vehicle depends on the items of equipment ordered, certain descriptions and illustrations may differ from your vehicle’s equipment. The detailed index at the back of this Owner’s Manual contains a complete listing of all subjects.
  • Page 8 6 INTRODUCTION...
  • Page 9: Vehicle Identification Number

    INTRODUCTION 7 WARNINGS AND CAUTIONS This Owners Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information.
  • Page 10: Vehicle Modifications/Alterations

    8 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death.
  • Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ To Disarm The System ....16 A WORD ABOUT YOUR KEYS ... . .11 ▫...
  • Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Locking/Unlocking Doors From The Inside . . .23 ▫ Child Restraints ..... . .55 ▫...
  • Page 13: A Word About Your Keys

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 A WORD ABOUT YOUR KEYS Ignition Key Removal The key fob contains the Remote Keyless Entry (RKE) 1. Push the brake pedal and place the transmission into transmitter with an integrated key. To use the mechanical first (1) or reverse (R) gear by selecting/pushing the key simply push the mechanical key release button.
  • Page 14 12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Remove the key from the ignition switch lock cylinder. WARNING! • Before exiting the vehicle, always apply the park- ing brake, and remove the Key Fob from the ignition. When leaving the vehicle, always lock your vehicle.
  • Page 15: Locking Doors With A Key

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Key-In-Ignition Reminder WARNING! (Continued) Opening the driver’s door when the key is in the ignition • Do not leave children or animals inside parked and the ignition switch position is OFF/LOCK, sounds a vehicles in hot weather.
  • Page 16: Replacement Keys

    14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: A key which has not been programmed is also Replacement Keys considered an invalid key, even if it is cut to fit the NOTE: Only keys that have been programmed to the ignition switch lock cylinder for that vehicle.
  • Page 17: Vehicle Security Alarm System - If Equipped

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 NOTE: Changes or modifications not expressly approved 4. Anomalous lifting/tilting of the vehicle. by the party responsible for compliance could void the Operation of the alarm is indicated by a visual signal user’s authority to operate the equipment.
  • Page 18: To Disarm The System

    16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE After the self-diagnosis stage, the vehicle security light The following operations are performed: flashes at a lower frequency (approximately one flash • Two brief flashes of the direction indicators. every three seconds). •...
  • Page 19: Illuminated Entry

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 NOTE: If the batteries of the key fob run out or there is a NOTE: None of the courtesy lights will operate if the fault in the system, the alarm can be switched off by dimmer control is in the “defeat”...
  • Page 20: To Unlock The Doors

    18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock The Doors Push and release the UNLOCK button on the RKE transmitter to unlock the doors. The park lights and turn signal lights will flash to acknowledge the signal and the illuminated entry system will turn on.
  • Page 21: Transmitter Battery Replacement

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 function was selected. Refer to “Electronic Vehicle Infor- Transmitter Battery Replacement mation Center (EVIC)” in “Understanding Your Instru- NOTE: Perchlorate Material – special handling may ment Panel” for further information. apply. www.dtsc.ca.gov/hazardouswaste/ When the doors are locked from outside the car (using perchlorate the remote control), the door lock indicator will illumi-...
  • Page 22 20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Replace the Key Fob battery with the following proce- 3. Remove battery compartment #4; dure: 4. Replace battery #5, respecting the polarity; 1. Push button #1 and move the metal insert #2 to 5.
  • Page 23: General Information

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 General Information 2. Closeness to a radio transmitter such as a radio station tower, airport transmitter, and some mobile or CB This device complies with Part 15 of the FCC rules and radios.
  • Page 24 22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • For personal security and safety in the event of a collision, lock the vehicle doors before you drive as well as when you park and leave the vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle.
  • Page 25: Things To Know Before Starting Your Vehicle

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Locking/Unlocking Doors From The Inside Emergency Door Locking Device Push the Lock LED Indicator button . The button has Passenger Side Door an LED that indicates whether the doors are locked or The passenger side door has a device to lock it when unlocked.
  • Page 26: Door Opening/Closing Mechanism Reset

    24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Introduce the metal insert of the ignition key in the front door pawl; or • Pull the internal door handle. Door Opening/Closing Mechanism Reset If the battery is disconnected or the protection fuse blows, the door opening/closing mechanism must be reset as follows: 1.
  • Page 27: Windows

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 WINDOWS Power Windows NOTE: • These operate when the ignition key is turned to MAR-ON and for about three minutes after the igni- tion key is turned to STOP or removed unless one of the doors is opened.
  • Page 28 26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When one of the two buttons is pushed briefly, the Electric Window System Reset window moves in stages; if the button is held down to After a break in power supply for the control units open, continuous automatic operation is activated.
  • Page 29: Decklid

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 DECKLID WARNING! NOTE: During normal car operation, the luggage com- Improper actuation of the power windows may be partment can reach temperatures above 149º F (65° C). dangerous. Never leave children unattended in a Pay attention when transporting objects that may be vehicle, and do not let children play with power damaged at such temperatures.
  • Page 30 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Insert the end of the rod in housing, making sure that the rod engages in the smallest hole of the retaining clip. Care must be taken to keep the decklid raised until the rod is fixed in the correct position.
  • Page 31 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 2. Lower the decklid approximately 7.8 inches (20 cm) WARNING! (Continued) from the engine compartment and let it drop. Make • When accessing the rear luggage compartment, do sure that the decklid is completely closed and not only not come into contact with engine, or other compo- fastened in safety position by trying to open it.
  • Page 32: Occupant Restraint Systems

    30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE OCCUPANT RESTRAINT SYSTEMS 2. If a child from 2 to 12 years old (not in a rear-facing child restraint) must ride in the front passenger seat, Some of the most important safety features in your move the seat as far back as possible and use the vehicle are the restraint systems: proper child restraint.
  • Page 33: Seat Belt Systems

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 6. All occupants should always wear their lap and WARNING! shoulder belts properly. • Never place a rear-facing child restraint in front of 7. The driver and front passenger seats should be moved an air bag.
  • Page 34 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ejection and the risk of injury caused by striking the buckled. After the sequence completes, the Seat Belt inside of the vehicle. Everyone in a motor vehicle should Reminder Light remains illuminated until the driv- be belted at all times.
  • Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Lap/Shoulder Belts WARNING! All seating positions in your vehicle are equipped with • Relying on the air bags alone could lead to more lap/shoulder belts. severe injuries in a collision. The air bags work The seat belt webbing retractor will lock only during very with your seat belt to restrain you properly.
  • Page 36 34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • Do not allow people to ride in any area of your • A lap belt worn too high can increase the risk of vehicle that is not equipped with seats and seat injury in a collision.
  • Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 WARNING! (Continued) WARNING! (Continued) • A seat belt that is too loose will not protect you • A frayed or torn seat belt could rip apart in a properly. In a sudden stop, you could move too far collision and leave you with no protection.
  • Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. The seat belt latch plate is above the back of the front 3. When the seat belt is long enough to fit, insert the latch seat, and next to your arm in the rear seat (for vehicles plate into the buckle until you hear a “click.”...
  • Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 4. Position the lap seat belt so that it is snug and lies low 5. Position the shoulder belt across the shoulder and across your hips, below your abdomen. To remove chest with minimal, if any slack so that it is comfort- slack in the lap belt portion, pull up on the shoulder able and not resting on your neck.
  • Page 40 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, across the abdomen. That way the strong bones of the grasp and twist the seat belt webbing 180 degrees to hips will take the force if there is a collision.
  • Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 Energy Management Feature This vehicle has a seat belt system with an Energy Management feature in the front seating positions that may help further reduce the risk of injury in the event of a collision.
  • Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the passenger seating position is equipped with an with this feature. Children 12 years old and under should ALR and is being used for normal usage: always be properly restrained in a vehicle with a rear seat.
  • Page 43: Supplemental Restraint System (Srs)

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 3. Allow the seat belt to retract. As the seat belt retracts, WARNING! (Continued) you will hear a clicking sound. This indicates the seat • Failure to replace the seat belt assembly could belt is now in the Automatic Locking Mode.
  • Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Steering Wheel and Column instrument panel. The words AIRBAG are embossed on the air bag covers. • Instrument Panel • Knee Impact Bolsters • Advanced Front Air Bags • Supplemental Side Air Bags •...
  • Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 output appropriate to the severity and type of collision as WARNING! determined by the Occupant Restraint Controller (ORC), • Being too close to the steering wheel or instrument which may receive information from the front impact sensors or other system components.
  • Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) some collisions, air bags won’t deploy at all. Al- • No objects should be placed over or near the air ways wear your seat belts even though you have air bag on the instrument panel, because any such bags.
  • Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 severe initial deceleration. Because air bag sensors mea- Supplemental Door-Integrated Side Air Bag sure vehicle deceleration over time, vehicle speed and Inflatable Curtains (SABICs) damage by themselves are not good indicators of whether or not an air bag should have deployed.
  • Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SABICs may help reduce the risk of head injury to front SABICs are designed to activate in certain side impacts. seat outboard occupants in certain side impacts. SABICs The Occupant Restraint Controller (“ORC”) determines may reduce the risk of injuries in certain side impacts, in whether the deployment of the SABIC in a particular addition to the injury reduction potential provided by the...
  • Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 SABICs are a supplement to the seat belt restraint system. WARNING! SABICs deploy in less time than it takes to blink your • Your vehicle is equipped with left and right eyes. Occupants, including children, who are up against or very close to SABICs can be seriously injured or killed.
  • Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Knee Impact Bolsters WARNING! (Continued) The Knee Impact Bolsters help protect the knees of the • Relying on the SABICs alone could lead to more driver and front passenger, and position the front occu- severe injuries in a collision.
  • Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 NOTE: Front and/or side air bags will not deploy in all skin, eyes, nose, or throat. If you have skin or eye collisions. This does not mean something is wrong with irritation, rinse the area with cool water. For nose or the air bag system.
  • Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Turn on the interior lights, which remain on as long as NOTE: the battery has power or until the ignition is cycled to • Air bag covers may not be obvious in the interior trim, OFF.
  • Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 Customer Action Customer Will See Customer Action Customer Will See 1. Turn ignition OFF. 6. Turn Left Turn Signal Left Turn Light is ON (Turn Signal Switch Must Switch ON. SOLID. Right Turn Light be placed in Neutral is ON SOLID.
  • Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag Warning Light ON/RUN position. After the self-check, the Air Bag Warning Light will turn off. If the ORC detects a mal- The air bags must be ready to inflate for your protection function in any part of the system, it turns on the Air Bag in a collision.
  • Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 • The Air Bag Warning Light comes on intermittently or Maintaining Your Air Bag System remains on while driving. WARNING! NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint •...
  • Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Event Data Recorder WARNING! (Continued) This vehicle is equipped with an event data recorder • Do not attempt to modify any part of your air bag (EDR). The main purpose of an EDR is to record, in system.
  • Page 57: Child Restraints

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 These data can help provide a better understanding of Child Restraints the circumstances in which crashes and injuries occur. Everyone in your vehicle needs to be buckled up at all times, including babies and children. Every state in the NOTE: EDR data are recorded by your vehicle only if a United States, and every Canadian province, requires non-trivial crash situation occurs;...
  • Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE There are different sizes and types of restraints for WARNING! children from newborn size to the child almost large enough for an adult seat belt. Always check the child seat In a collision, an unrestrained child can become a Owner’s Manual to make sure you have the correct seat projectile inside the vehicle.
  • Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight or Age Recommended Type of Child Restraint Infants and Toddlers Children who are two years old or Either an Infant Carrier or a Convertible younger and who have not reached the Child Restraint, facing rearward in the height or weight limits of their child...
  • Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infant and Child Restraints WARNING! Safety experts recommend that children ride rear-facing • Never place a rear-facing child restraint in front of in the vehicle until they are two years old or until they an air bag.
  • Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 remain in a forward-facing child seat with a harness for WARNING! (Continued) as long as possible, up to the highest weight or height directions exactly when installing an infant or allowed by the child seat. child restraint.
  • Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children Too Large For Booster Seats 5. Can the child stay seated like this for the whole trip? Children who are large enough to wear the shoulder belt If the answer to any of these questions was “no,” then the comfortably, and whose legs are long enough to bend child still needs to use a booster seat in this vehicle.
  • Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Installing Child Restraints Using The Vehicle Seat Lap/Shoulder Belt Systems For Installing Child Belt Restraints In This Vehicle The seat belt in the front passenger seat is equipped with a Switchable Automatic Locking Retractor (ALR). This type of seat belt is designed to keep the lap portion of the seat belt tight around the child restraint so that it is not necessary to use a locking clip.
  • Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s Weight limit of the Child Restraint Always use the tether anchor when weight + weight of the child re- using the seat belt to install a for- straint) for using the Tether Anchor ward facing child restraint, up to with the seat belt to attach a forward...
  • Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 5. To lock the seat belt, pull down on the shoulder part of strap. See the section “Installing Child Restraints the belt until you have pulled all the seat belt webbing Using The Top Tether Anchorage” for directions to out of the retractor.
  • Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Always use the tether anchor when using the seat belt to WARNING! (Continued) install a forward facing child restraint, up to the recom- tether strap of a rear-facing car seat to the tether mended weight limit of the child restraint.
  • Page 67: Engine Break-In Recommendations

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 1. Look behind the seating position where you plan to Transporting Pets install the child restraint to find the tether anchorage. Deploying air bags could harm your pet. An unrestrained You may need to tilt the seatback forward to provide pet will be thrown about and possibly injured, or injure a better access to the tether anchorage.
  • Page 68: Safety Tips

    66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Avoid driving at a constant speed, either fast or slow, SAFETY TIPS for long periods. Transporting Passengers • Do not make any full throttle starts and avoid full NEVER TRANSPORT PASSENGERS IN THE CARGO throttle acceleration while cruising within the posted AREA.
  • Page 69: Exhaust Gas

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Exhaust Gas WARNING! (Continued) • If it is necessary to sit in a parked vehicle with the WARNING! engine running, adjust your heating or cooling Exhaust gases can injure or kill. They contain carbon controls to force outside air into the vehicle.
  • Page 70: Safety Checks You Should Make Inside The Vehicle

    68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Safety Checks You Should Make Inside The authorized dealer. If the light stays on, flickers, or comes Vehicle on while driving, have the system checked by an autho- rized dealer. Seat Belts Defroster Inspect the belt system periodically, checking for cuts, frays, and loose parts.
  • Page 71: Periodic Safety Checks You Should Make Outside

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Periodic Safety Checks You Should Make Outside Door Latches The Vehicle Check for positive closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check area under vehicle after overnight parking for fuel, patterns.
  • Page 73 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS MIRRORS ......74 LIGHTS ......83 ▫...
  • Page 74 72 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Follow Me Home/Headlight Delay — If ▫ To Deactivate ......93 Equipped .
  • Page 75 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 73 ▫ Console Features ..... .105 CUPHOLDER ......104 ▫...
  • Page 76: Mirrors

    74 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror A single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the wind- shield. The mirror installs on the windshield button with a counterclockwise rotation and requires no tools for mounting.
  • Page 77: Outside Mirrors

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 75 Outside Mirrors Power Mirrors To receive maximum benefit, adjust the outside mirrors The power mirror controls are located on the center to center on the adjacent lane of traffic and a slight console. overlap of the view obtained from the inside mirror.
  • Page 78: Folding Mirrors

    76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The power mirror controls consist of mirror select knob and a four-way mirror control switch. To adjust a mirror, turn the power mirror control knob to the left or right to select the mirror that you want to adjust. Using the mirror control switch, press on any of the four arrows for the direction that you want the mirror to move.
  • Page 79: Seats

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 77 SEATS Manual Seats Seats are a part of the Occupant Restraint System of the Forward And Rearward Adjustment vehicle. The adjusting bar is at the front of the driver seat, near the floor. Pull the bar upward to move the seat forward or WARNING! rearward.
  • Page 80 78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Recliner Adjustment The recliner lever is located on the outboard side of the seat. To recline the seat, lean forward slightly, pull the recliner lever upward, lean backward until the seat is in the desired position, and release the lever.
  • Page 81 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 79 WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
  • Page 82: Non-Adjustable Head Restraints

    80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Non-Adjustable Head Restraints TO OPEN AND CLOSE THE DECKLID The non-adjustable head restraints are form fitted into CAUTION! the upper structure of the seatback and are designed to reduce the risk of injury by restricting head movement in •...
  • Page 83 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81 To open the decklid: 3. Move to the rear of the vehicle and lift the decklid. 1. Open the drivers side door. 2. Pull the decklid release lever located on the rear of the drivers door sill.
  • Page 84 82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Lift upward on the decklid prop rod to release it from 5. Place the decklid prop rod in the decklid slot to secure the stowage retainer. the decklid in the open position. Decklid Prop Rod Slot 1 —...
  • Page 85: Lights

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 CAUTION! WARNING! (Continued) • Access the luggage compartment only with the To prevent possible damage, do not slam the decklid vehicle stationary. Before exiting the vehicle, you to close it. Use a firm downward push at the center of should always place the vehicle into First gear, the decklid to ensure the decklid latch is fully apply the parking brake, and remove the key from...
  • Page 86: Headlights

    84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The external lights can only be turned on with Headlights the ignition in the ON/RUN position. Rotate the end of the multifunction lever up- ward to the first detent for headlight operation. Multifunction Lever Headlight Operation...
  • Page 87: Daytime Running Lights

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 NOTE: When the headlights are turned on, the Daytime Flash-To-Pass Running Lights will be deactivated. You can signal another vehicle with your headlights by partially pulling the multifunction lever toward the steer- Daytime Running Lights ing wheel.
  • Page 88: Lane Change Assist

    86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If either light remains on and does not flash, or Activation there is a very fast flash rate, check for a defective outside Remove the key or turn the ignition to the OFF/LOCK light bulb.
  • Page 89: Dimmer Controls

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 Dimmer Controls Interior Light The dimmer controls are located on the left side of the The interior light is located in the headliner in between instrument panel below the instrument cluster. the sun visors. The interior light can be set to three different positions (Off/Left Position, Center Position, On/Right Position).
  • Page 90 88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interior Light Timing (Center Position) CAUTION! There are four different modes of operation that can be Before getting out of the vehicle be sure that the activated in this position: switch is in the center position or that the lights are •...
  • Page 91: Windshield Wipers And Washers

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 WINDSHIELD WIPERS AND WASHERS Intermittent Wiper System The windshield wiper/washer controls are located on the Use the intermittent wiper when weather conditions windshield wiper/washer lever on the right side of the make a single wiping cycle with a variable pause be- steering column.
  • Page 92: Windshield Washers

    90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The mist feature does not activate the washer WARNING! pump; therefore, no washer fluid will be sprayed on the windshield. The wash function must be used in order to Sudden loss of visibility through the windshield spray the windshield with washer fluid.
  • Page 93: Tilt/Telescoping Steering Column

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 TILT/TELESCOPING STEERING COLUMN To unlock the steering column, push the lever downward (toward the floor). To tilt the steering column, move the This feature allows you to tilt the steering column steering wheel upward or downward as desired. To upward or downward.
  • Page 94: Electronic Speed Control - If Equipped

    92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 18 mph (30 km/h) up to the maximum speed of 105 mph (170 km/h). The Electronic Speed Control Lever is located on the left side of the steering column.
  • Page 95: To Activate

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 To Activate To Set A Desired Speed Rotate the end of the multifunction lever to activate the Turn the Electronic Speed Control ON. When the vehicle Electronic Speed Control. The Cruise Indicator Light in has reached the desired speed, move the electronic speed the Electronic Vehicle Information Center (EVIC) will control lever upward SET(+) and release.
  • Page 96: To Resume Speed

    94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the lever is continually help up, the set speed will To Resume Speed continue to increase until the lever is released, then the To resume a previously set speed, push the RESUME new set speed will be established.
  • Page 97: To Accelerate For Passing

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 The speed decrement shown is dependant on the speed Metric Speed (km/h) of U.S. (mph) or Metric (km/h) units: • Tapping the Speed Control lever down (-) once will U.S. Speed (mph) result in a 2 km/h decrease in set speed. Each subse- quent tap of the lever results in a decrease of 2 km/h.
  • Page 98: Parking Sensors - If Equipped

    96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PARKING SENSORS — IF EQUIPPED Activation/Deactivation They are located in the rear bumper and their function is The sensors are automatically activated when reverse to detect the presence of any obstacles near the rear part gear is engaged.
  • Page 99: Indications On Display - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 • Remains constant if the distance between car and obstacle remains unchanged; if this situation concerns the side sensors, the signal will stop after approxi- mately 3 seconds to avoid, for example, indications in the event of manoeuvres along a wall.
  • Page 100: Fault Indication

    98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If an obstacle is detected in the rear central area, the Fault Indication display shows all the arcs in the rear central area, up to Parking sensor failures, if any, will be indicated when the one that corresponds to the position of the obstacle reverse is engaged by the switching on of the warn-...
  • Page 101 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 • Mechanical interference (e.g washing the car, rain, NOTE: The sensor must be free from mud, dirt snow or ice strong wind, hail) may cause the sensor to detect a in order for the system to operate correctly. Be careful not to non-existent obstacle (“echo interference”).
  • Page 102: Power Outlets

    100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER OUTLETS CAUTION! (Continued) Your vehicle is equipped with a 12 Volt (13 Amp) power • The vehicle must be driven slowly when using the outlet that can be used to power cellular phones, small Parking Sensor system in order to be able to stop in electronics and other low powered electrical accessories.
  • Page 103 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 The power outlet is located on the central tunnel, be- WARNING! tween the two cup holders. It only operates with the ignition key at MAR-ON. To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet.
  • Page 104 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! CAUTION! • Many accessories that can be plugged in draw • Do not exceed the maximum power of 180 Watts (15 power from the vehicle’s battery, even when not in Amps) at 12 Volts. If the 180 Watts (15 Amps) power use (i.e., cellular phones, etc.).
  • Page 105: Cigar Lighter And Ash Receiver - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 CIGAR LIGHTER AND ASH RECEIVER — IF NOTE: EQUIPPED • Always check that the cigar lighter is switched off. The cigar lighter and ash receiver are located on the central • Do not connect devices with power higher than 180 W tunnel.
  • Page 106: Cupholder

    104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDER STORAGE A cupholder is located in the rear of the center console. Seatback Storage Located in the back of both the driver and passenger front seats are pockets that can be used for storage. Center Console Cupholder Drivers Side Seatback Storage...
  • Page 107: Console Features

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 Console Features Rear Compartment Storage There is a cargo pouch storage area located between the CAUTION! driver and passengers seat (If Equipped). • To prevent possible damage, do not slam the deck- lid to close it. Use a firm downward push at the center of the decklid to ensure the decklid latch is fully engaged.
  • Page 108 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Your vehicle is equipped with a open storage area located WARNING! under the decklid. Do not allow children to have access to rear storage compartment. Always close the hood when your vehicle is unattended. Once in the rear storage com- partment, young children may not be able to escape.
  • Page 109 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 WARNING! (Continued) maximum permitted load in the luggage compart- ment. When accessing the rear luggage compart- ment, do not come into contact with engine, or other components, that may be hot and could burn you if touched.
  • Page 111 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ Trip Computer ..... . .137 INSTRUMENT PANEL FEATURES ..110 ▫...
  • Page 112: Instrument Panel Features

    110 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 — Climate Control Air Outlets 6 — Switch Bank (A/C/Door Lock Switch/Door Mirror Demisting) 2 — Exterior Light Lever 7 — Climate Controls 3 — Instrument Cluster 8 — Driver Air Bag 4 —...
  • Page 113: Instrument Cluster

    UNDERSTANDING YOUR INSTRUMENT PANEL 111 INSTRUMENT CLUSTER...
  • Page 114: Instrument Cluster Descriptions

    112 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also 1. Tire Pressure Monitoring Telltale Light — If Equipped reduces fuel efficiency and tire tread life, and may affect Each tire, including the spare (if provided), the vehicle’s handling and stopping ability.
  • Page 115 UNDERSTANDING YOUR INSTRUMENT PANEL 113 as intended. TPMS malfunctions may occur for a variety WARNING! (Continued) of reasons, including the installation of replacement or sensor damage. Do not use tire sealant from a can or alternate tires or wheels on the vehicle that prevent the balance beads if your vehicle is equipped with a TPMS from functioning properly.
  • Page 116 114 UNDERSTANDING YOUR INSTRUMENT PANEL 4. Electronic Speed Control Set Indicator Light — If NOTE: Driving with a hot engine cooling system could Equipped damage your vehicle. The digital warning light may switch on (together with a message on the display) to This light will turn on when the electronic indicate that the coolant temperature is too high;...
  • Page 117 UNDERSTANDING YOUR INSTRUMENT PANEL 115 7. Tachometer Do not travel with the fuel tank almost empty; any gaps in fuel delivery could damage the catalytic converter. This gauge measures engine revolutions per minute 11. Park/Headlight ON Indicator (RPM x 1000). Before the pointer reaches the red area, ease up on the accelerator to prevent engine damage.
  • Page 118 116 UNDERSTANDING YOUR INSTRUMENT PANEL does not come on when turning the key from OFF to WARNING! ON/RUN, have the condition checked promptly. A malfunctioning catalytic converter, as referenced Certain conditions, such as smart fuel door left open, above, can reach higher temperatures than in normal poor fuel quality, etc., may illuminate the MIL after operating conditions.
  • Page 119 UNDERSTANDING YOUR INSTRUMENT PANEL 117 belt is buckled. After the sequence completes, the Seat 16. Passenger Air Bag Warning Light Belt Reminder Light remains illuminated until the driv- This light should come and remain on for four er’s seat belt is buckled. The driver should instruct all to eight seconds as a bulb check when the other occupants to buckle their seat belts.
  • Page 120 118 UNDERSTANDING YOUR INSTRUMENT PANEL 18. Fuel Door Reminder placed in the 1st position. The light should turn off. If the light remains lit with the engine running, your The arrow in this symbol is a reminder that the vehicle will usually be drivable. However, see an autho- Fuel Filler Door is located on the right side of rized dealer for service as soon as possible.
  • Page 121 MAR-ON, the word Service will appear on the display, followed by the number of miles or kilometers left. Contact a dedicated Alfa Romeo Dealership. The opera- tions in the “Scheduled Servicing Plan” will be per- formed and the message will be reset.
  • Page 122 120 UNDERSTANDING YOUR INSTRUMENT PANEL 24. Odometer Display 25. Transmission Fault Indicator The odometer display shows the total distance the ve- This light will illuminate (together with a mes- hicle has been driven. sage in the EVIC and a buzzer) to indicate a transmission fault.
  • Page 123 UNDERSTANDING YOUR INSTRUMENT PANEL 121 several miles (kilometers) at speeds greater than 30 mph indicate that the parking brake is applied, that the brake (48 km/h), see your authorized dealer as soon as possible fluid level is low, or that there is a problem with the to have the problem diagnosed and corrected.
  • Page 124 122 UNDERSTANDING YOUR INSTRUMENT PANEL The light will remain on until the cause is corrected. Vehicles equipped with the Anti-Lock Brake System (ABS), are also equipped with Electronic Brake Force NOTE: The light may flash momentarily during sharp Distribution (EBD). In the event of an EBD failure, the cornering maneuvers, which change fluid level condi- Brake Warning Light will turn on along with the ABS tions.
  • Page 125 UNDERSTANDING YOUR INSTRUMENT PANEL 123 29. Brake Warning Light — If Equipped The dual brake system provides a reserve braking capac- ity in the event of a failure to a portion of the hydraulic This light monitors various brake functions, in- system.
  • Page 126 124 UNDERSTANDING YOUR INSTRUMENT PANEL The light also will turn on when the parking brake is WARNING! applied with the ignition switch in the ON/RUN posi- tion. Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. NOTE: This light shows only that the parking brake is It will take longer to stop the vehicle.
  • Page 127: Electronic Vehicle Information Center (Evic)

    UNDERSTANDING YOUR INSTRUMENT PANEL 125 brakes. If the ABS light does not turn on when the The Electronic Vehicle Information Center (EVIC) fea- ignition switch is turned to the ON/RUN position, have tures a driver-interactive display that is located in the the light inspected by an authorized dealer.
  • Page 128 126 UNDERSTANDING YOUR INSTRUMENT PANEL • UP Arrow Button The system allows the driver to select information by pushing the following buttons mounted on the instru- Push and release the UP arrow button to scroll ment panel to the left of the steering column: upward through the main menu and sub- menus or to increase the displayed value.
  • Page 129: Electronic Vehicle Information Center (Evic) Setup Menu

    UNDERSTANDING YOUR INSTRUMENT PANEL 127 • SET/BACK Arrow Button • Trip B/Data • Set Time Push and release the SET/BACK arrow button to access/ select the information screens or sub-menu screens of a • Set Date main menu item. Push and hold the SET/BACK arrow •...
  • Page 130 128 UNDERSTANDING YOUR INSTRUMENT PANEL Selecting An Option Of The Main Menu Without 3. Briefly push the SET/BACK button to select the dis- Submenu played submenu option and to open the relevant setup menu. 1. Briefly push the SET/BACK button to select the main menu option to set.
  • Page 131 UNDERSTANDING YOUR INSTRUMENT PANEL 129 • Briefly push the SET/BACK button to go back to the To set the speed limit, proceed as follows: menu screen, or push and hold the SET/BACK button 1. Briefly push the SET/BACK button. The display will (approximately one second) to go back to the main show the message (Speed Buzzer).
  • Page 132 130 UNDERSTANDING YOUR INSTRUMENT PANEL For activation / deactivation, proceed as follows: Proceed as follows: 1. Briefly push the SET/BACK button. “On” or “Off” 1. Briefly push the SET/BACK button. The display will will display in the EVIC (according to previous set- show the two sub-menu items “Time”...
  • Page 133 UNDERSTANDING YOUR INSTRUMENT PANEL 131 NOTE: sub-menu screen, or push and hold the SET/BACK button (approximately one second) to go back to the • The setting will increase or decrease by one unit each main screen without storing the settings. time the UP or DOWN button is pushed.
  • Page 134 132 UNDERSTANDING YOUR INSTRUMENT PANEL 5. Briefly push the SET/BACK button and “day” will Autoclose flash on the display. With this function active, the doors will automatically lock at when the vehicle’s speed exceeds 12 mph 6. Push and release the UP or DOWN button for (20 km/h).
  • Page 135 UNDERSTANDING YOUR INSTRUMENT PANEL 133 Units (Set Units) 5. Push and release the UP or DOWN button for setting. This function may be used to set the measurement unit in three submenus: “Distance,” “Temperature” and “Fuel 6. Briefly push the SET/BACK button to return to the Economy.”...
  • Page 136 134 UNDERSTANDING YOUR INSTRUMENT PANEL 3. When accessing the “Temperature” submenu: briefly To set the required language, proceed as follows: push the SET/BACK button. Either “°F” or “°C” will 1. Briefly push the SET/BACK button. The previously appear on the display (according to the previous set “language”...
  • Page 137 UNDERSTANDING YOUR INSTRUMENT PANEL 135 To adjust the volume proceed as follows: Service (Scheduled Servicing) — If Equipped With this function it is possible to view infor- 1. Briefly push the SET/BACK button. The previously mation on mileage intervals for servicing. set volume “level”...
  • Page 138 136 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The “Scheduled Servicing Plan” includes car Day Lights — If Equipped maintenance at fixed intervals, refer to the Maintenance This function may be used to activate / deactivate the chapter. This message is displayed automatically along Daytime Running Lamps.
  • Page 139: Change Engine Oil Indicator System

    UNDERSTANDING YOUR INSTRUMENT PANEL 137 Exit Menu Change Engine Oil Indicator System This function closes the initial menu screen. Your vehicle is equipped with an engine oil Briefly push the SET/BACK button to go back to the change indicator system. The “Change Engine Oil” mes- main screen.
  • Page 140 138 UNDERSTANDING YOUR INSTRUMENT PANEL • A long button push resets the system and then starts a Trip Button new trip. The TRIP button, located on the right steering column stalk, can be used to display and to reset the trip values. Trip Functions Both trip functions are resettable (reset —...
  • Page 141 UNDERSTANDING YOUR INSTRUMENT PANEL 139 • Travel Distance • Disconnecting/Reconnecting the battery resets the system. • Average speed NOTE: If the reset operation occurs in the presence of • Travel time the screens concerning Trip A or Trip B, only the infor- NOTE: “Trip B”...
  • Page 142: Values Displayed

    140 UNDERSTANDING YOUR INSTRUMENT PANEL Values Displayed Indications On Display Each time a value is selected, the following information is shown in the EVIC: • “Trip A” or “Trip B” location(s) • Name, value and unit of measure of the selected value (e.g.
  • Page 143 UNDERSTANDING YOUR INSTRUMENT PANEL 141 Range Travel Distance This indicates the distance which may be traveled with This value shows the distance covered since the last reset. the fuel remaining in the tank, assuming that driving Current Fuel Consumption conditions will not change. The message “----” will This indicates the fuel consumption.
  • Page 144: Radio System

    142 UNDERSTANDING YOUR INSTRUMENT PANEL RADIO SYSTEM by relocating the mobile phone antenna. This condition is not harmful to the radio. If your radio performance does The radio system consists of: not satisfactorily “clear” by the repositioning of the • Supply cables for radio, speakers and aerial; antenna, it is recommended that the radio volume be turned down or off during mobile phone operation.
  • Page 145: Heating And Ventilation

    UNDERSTANDING YOUR INSTRUMENT PANEL 143 HEATING AND VENTILATION 1. A/C Button Manual Climate Controls With A/C Press this button to engage the Air Conditioning. A light will illuminate when the Air Conditioning system is engaged. MAX A/C For maximum cooling, use the A/C and recirculation modes at the same time.
  • Page 146 144 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Mode Control Mix – Air is directed through the floor, defrost, and side window demister outlets. This setting works Rotate this control to change the system between Modes best in cold or snowy conditions that require (Panel, Bi-Level, Floor, Mix, Defrost).
  • Page 147 UNDERSTANDING YOUR INSTRUMENT PANEL 145 NOTE: speed increases as you move the control clockwise from the “0” (OFF) position. There are four blower speeds. • Continuous use of the Recirculation mode may make the inside air stuffy and window fogging may occur. Heating Extended use of this mode is not recommended.
  • Page 148 146 UNDERSTANDING YOUR INSTRUMENT PANEL Fast Demisting/Defrosting Of Windshield And Window Demisting Side Windows In the event of considerable external moisture and/or Proceed as follows: rain and/or large differences in temperature inside and outside the passenger compartment, perform the follow- 1.
  • Page 149 UNDERSTANDING YOUR INSTRUMENT PANEL 147 Ventilation NOTE: The internal air recirculation system makes it possible to reach the required heating or ventilation To ventilate the passenger compartment properly, pro- conditions more quickly. Do not use the internal air ceed as follows: recirculation function on rainy/cold days to avoid the 1.
  • Page 150 148 UNDERSTANDING YOUR INSTRUMENT PANEL Cooling Adjustment Door Mirror Demisting Proceed as follows: 1. Move the Recirculation Control to 2. Rotate the Temperature Control towards the red sec- tion to increase the temperature. 3. Turn the Blower Control counterclockwise to reduce the fan speed.
  • Page 151 UNDERSTANDING YOUR INSTRUMENT PANEL 149 System Maintenance In winter, the climate control system must be turned on at least once a month for about 10 minutes. Have the system inspected at an authorized dealer before the summer. NOTE: The system uses R-1234yf and R134a coolant which does not pollute the environment in the event of accidental leakage.
  • Page 153 STARTING AND OPERATING CONTENTS STARTING PROCEDURES ....154 ALFA DNA SYSTEM (DYNAMIC CAR CONTROL SYSTEM) ......163 ▫...
  • Page 154 152 STARTING AND OPERATING ▫ Shallow Standing Water ....171 ▫ Hydraulic Brake Assistant System (HBA) ..182 ▫ Electronic Q2 System (E-Q2) ... . .183 PARKING BRAKE .
  • Page 155 STARTING AND OPERATING 153 ▫ Tire Types ......199 FUEL REQUIREMENTS — 1.750 Turbo ..214 ▫...
  • Page 156: Starting Procedures

    154 STARTING AND OPERATING STARTING PROCEDURES Automatic Transmission Before starting your vehicle, adjust your seat, adjust both To start the engine press the brake pedal: the system inside and outside mirrors, and fasten your seat belts. engages NEUTRAL (N) automatically. After the starting procedure, FIRST (1st) gear or RE- WARNING! VERSE (R) can be engaged.
  • Page 157: Normal Starting

    STARTING AND OPERATING 155 When the 1, N or R buttons are pressed (or + steering Cold Weather Operation wheel stalk is operated) without pressing the brake Your engine is designed to operate at temperatures as pedal, no gear change request is implemented by the low as 0°F (-18°C).
  • Page 158: After Starting

    156 STARTING AND OPERATING on the type of driving and the amount of cargo, the pump CAUTION! will run for up to five minutes after the engine has been • Do not attempt to push or tow your vehicle to get it shut off to circulate coolant through the turbocharger.
  • Page 159: Using The Transmission

    STARTING AND OPERATING 157 WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • Do not leave the ignition key in or near the vehicle those in or near the vehicle. As with all vehicles, (or in a location accessible to children). A child you should never exit a vehicle while the engine is could operate power windows, other controls, or running.
  • Page 160 158 STARTING AND OPERATING MANUAL mode in which the driver must shift gears manually (using the steering wheel mounted shift paddles). Automatic (AUTO) mode, in which the system shifts between all forward gears automatically. When the “Race” mode is selected via the DNA selector, the only allowed transmission operating mode is MANUAL.
  • Page 161 STARTING AND OPERATING 159 Use the “+” shift paddle to engage a higher gear, or the AUTO Mode “–” paddle to engage a lower gear. In AUTO mode the transmission shifts gears automati- cally depending on vehicle speed, engine RPM, and If a requested gear shift is not allowed (typically, because accelerator pedal position.
  • Page 162 160 STARTING AND OPERATING NOTE: When starting on a fairly steep incline, it may be Tapping the (+) paddle will upshift the transmission to advisable to engage the parking brake. the next higher gear, while tapping the (-) paddle will downshift to the next lower gear.
  • Page 163 STARTING AND OPERATING 161 Neutral (N) WARNING! Use this range when the vehicle is standing for prolonged Do not coast in NEUTRAL and never turn off the periods with the engine running. Always apply the ignition to coast down a hill. These are unsafe parking brake if you must leave the vehicle.
  • Page 164 162 STARTING AND OPERATING If the vehicle is stationary with the engine running and 2. Stop the engine and firmly engage the parking brake. FIRST (1st) gear or REVERSE (R) engaged, the system 3. Release the brake pedal. activates an acoustic signal and automatically places the transmission in NEUTRAL (N) when: When parking on an incline, turn the front wheels toward the curb on a downhill slope and away from the curb on...
  • Page 165: Alfa Dna System (Dynamic Car Control System)

    STARTING AND OPERATING 163 applied after a short time, the car will roll back. Either ALFA DNA SYSTEM (DYNAMIC CAR CONTROL reapply the brake (to hold the vehicle) or press the SYSTEM) accelerator to climb the hill. This vehicle is equipped with a “Alfa DNA” system lever (located on the center console).
  • Page 166: Driving Modes

    164 STARTING AND OPERATING This also acts on the dynamic car control systems (engine, The selected driving mode is indicated by the corre- gearbox/transmission, ESC system). sponding LED switching in the panel and by an indica- tion on the display. Dynamic Mode Activation Move the Alfa DNA system lever upwards (to the letter...
  • Page 167 STARTING AND OPERATING 165 Electronic Stability Control (ESC) and Anti-Slip Regu- Deactivation lation (ASR) systems: To deactivate Dynamic mode and return to Natural, The ESC and ASR system ensures more enjoyable, move lever downwards (to letter “A”) and keep it in this sportier driving while guaranteeing the stability of the position for half a second.
  • Page 168 166 STARTING AND OPERATING Electronic Stability Control (ESC) and Anti-Slip Regu- NOTE: In Race mode, the sensitivity of the accelerator lation (ASR) systems: pedal increases considerably. Consequently, driving is less fluid and comfortable. These systems are deactivated in order to ensure the fullest sensation of sport, leaving the driver in full control In Race mode the transmission only works in MANUAL of the vehicle.
  • Page 169 STARTING AND OPERATING 167 Natural Mode until the corresponding LED lights up and the All Weather mode activation indicator appears on the dis- Electronic Stability Control (ESC) and Anti-Slip Regu- play. lation (ASR) systems: Electronic Stability Control (ESC) and Anti-Slip Regu- ESC and ASR system thresholds are aimed at providing lation (ASR) systems: comfort and safety in normal grip and driving condi-...
  • Page 170: System Failure

    168 STARTING AND OPERATING Deactivation The display will become grey (same screen as Natural mode) but without an indication of the Alfa DNA setting. To deactivate All Weather mode and return to Natural The display will also show a warning message. mode, move the Alfa DNA system lever upwards (to Please contact your authorized dealer for service.
  • Page 171: Driving On Slippery Surfaces

    STARTING AND OPERATING 169 vehicle will automatically shift the gear to guarantee To discontinue the strategy, simply interrupt the above maximum acceleration, once the correct shifting speed sequence of operations or release the accelerator pedal. has been reached. DRIVING ON SLIPPERY SURFACES WARNING! Acceleration Rapid acceleration on snow covered, wet, or other slip-...
  • Page 172: Traction

    170 STARTING AND OPERATING Traction Your vehicle may be equipped with a Limited Slip Differential (LSD) that reduces, but does not eliminate, When driving on wet or slushy roads, it is possible for a the amount of wheel slip across a given axle for im- wedge of water to build up between the tire and road proved handling.
  • Page 173: Shallow Standing Water

    STARTING AND OPERATING 171 WARNING! (Continued) WARNING! (Continued) distances. Therefore, after driving through stand- your vehicle away swiftly. Failure to follow this ing water, drive slowly and lightly press on the warning may result in injuries that are serious or brake pedal several times to dry the brakes.
  • Page 174: Parking Brake

    172 STARTING AND OPERATING PARKING BRAKE CAUTION! (Continued) Before leaving the vehicle, make sure that the parking • Do not exceed 5 mph (8 km/h) when driving brake is fully applied. Also, be certain to leave manual through standing water. This will minimize wave transmission in REVERSE (R) or FIRST (1st) gear.
  • Page 175 STARTING AND OPERATING 173 should always be applied whenever the driver is not in the vehicle. WARNING! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
  • Page 176: Brake System

    174 STARTING AND OPERATING BRAKE SYSTEM WARNING! (Continued) Your vehicle is equipped with dual hydraulic brake • Be sure the parking brake is fully disengaged systems. If either of the two hydraulic systems loses before driving; failure to do so can lead to brake normal capability, the remaining system will still func- failure and a collision.
  • Page 177: Esc (Electronic Stability Control) System

    STARTING AND OPERATING 175 ESC (ELECTRONIC STABILITY CONTROL) WARNING! (Continued) SYSTEM hydroplaning. ESC also cannot prevent collisions The ESC system improves the directional control and resulting from loss of vehicle control due to inap- stability of the vehicle in various driving conditions. propriate driver input for the conditions.
  • Page 178: System Activation

    176 STARTING AND OPERATING This vehicle’s advanced electronic brake control system WARNING! (Continued) also includes: Electronic Brake Distribution (EBD), Anti- vehicle modification or poor vehicle maintenance Lock Brake System (ABS), Cornering Brake Control Sys- that reduces the effectiveness of the ESC system can tem (CBC), Drag Torque Control System (DTC), AntiSlip increase the risk of loss of vehicle control, vehicle Regulation System (ASR), Hill Start Assist (HSA), Hy-...
  • Page 179: System Intervention

    STARTING AND OPERATING 177 System Intervention The system’s pump motor runs during an ABS stop to provide regulated hydraulic pressure. The pump motor This is indicated by the flashing of the warning light on makes a low humming noise during operation, which is the instrument panel, to inform the driver that the car is normal.
  • Page 180 178 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • For maximum efficiency of the braking system, a • The capability of the ABS must never be tested bedding-in period of about 311 miles (500 km) is irresponsibly and dangerously, in such a way as to required: during this period it is advisable to avoid compromise personal safety and the safety of others.
  • Page 181: Cornering Brake Control System (Cbc)

    STARTING AND OPERATING 179 System Intervention AntiSlip Regulation System (ASR) A slight pulsing of the brake pedal and noise indicates WARNING! the intervention of the ABS: this is completely normal when the system intervenes. • Electronic Stability Control (ESC) cannot prevent the natural laws of physics from acting on the Cornering Brake Control System (CBC) vehicle, nor can it increase the traction afforded by...
  • Page 182 180 STARTING AND OPERATING Depending on the slipping conditions, two different WARNING! (Continued) control systems are activated: • Vehicle modifications, or failure to properly main- • If the slipping involves both drive wheels, the ASR tain your vehicle, may change the handling charac- system intervenes, reducing the power transmitted by teristics of your vehicle, and may negatively affect the engine.
  • Page 183: Hill Start Assist (Hsa)

    STARTING AND OPERATING 181 Hill Start Assist (HSA) When the two seconds have elapsed, without starting, the system is automatically deactivated, gradually releas- This is an integral part of the ESC system and facilitates ing the braking pressure. During this release stage, the starting on slopes, activating automatically in the follow- typical brake disengagement noise, indicating that the ing cases:...
  • Page 184: Hydraulic Brake Assistant System (Hba)

    182 STARTING AND OPERATING Hydraulic Brake Assistant System (HBA) applies the optimal brake pressure. This can reduce the braking distance, the HBA system therefore completes the ABS. WARNING! Maximum assistance from the HBA system is obtained • The HBA system can’t overrule the natural laws of pressing the brake pedal very quickly.
  • Page 185: Electronic Q2 System (E-Q2)

    STARTING AND OPERATING 183 Electronic Q2 System (E-Q2) TIRE SAFETY INFORMATION The Electronic Q2 system intervenes during accelera- Tire Markings tion on corners, braking the inner drive wheel and thus increasing the traction of the outer wheel (which bears more of the car’s weight): the torque is thus distributed optimally between the drive wheels in accordance with the driving conditions and road surface, permitting par- ticularly effective, sporty driving.
  • Page 186 184 STARTING AND OPERATING • Temporary spare tires are designed for temporary NOTE: emergency use only. Temporary high pressure com- • P (Passenger) — Metric tire sizing is based on U.S. pact spare tires have the letter “T” or “S” molded into design standards.
  • Page 187 STARTING AND OPERATING 185 Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or ..blank..= Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
  • Page 188 186 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions –...
  • Page 189: Tire Identification Number (Tin)

    STARTING AND OPERATING 187 Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on The TIN may be found on one or both sides of the tire, the outboard side, then you will find it on the inboard however, the date code may only be on one side.
  • Page 190 188 STARTING AND OPERATING EXAMPLE: DOT MA L9 ABCD 0301 01 = Number representing the year in which the tire was manufactured (two digits) – 01 means the year 2001 – Prior to July 2000, tire manufacturers were only required to have one number to represent the year in which the tire was manufactured.
  • Page 191: Tire Terminology And Definitions

    STARTING AND OPERATING 189 Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after Cold Tire Inflation Pressure the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
  • Page 192: Tire Loading And Tire Pressure

    190 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Example Tire Placard Location (B-Pillar) Example Tire Placard Location (Door)
  • Page 193 STARTING AND OPERATING 191 Tire And Loading Information Placard 3. Tire size designed for your vehicle. 4. Cold tire inflation pressures for the front, rear, and spare tires. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading...
  • Page 194 192 STARTING AND OPERATING To determine the maximum loading conditions of your 4. The resulting figure equals the available amount of vehicle, locate the statement “The combined weight of cargo and luggage load capacity. For example, if occupants and cargo should never exceed XXX lbs or “XXX”...
  • Page 195 STARTING AND OPERATING 193 NOTE: • If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. The follow- ing table shows examples on how to calculate total load, cargo/luggage, and towing capacities of your vehicle with varying seating configurations and num- ber and size of occupants.
  • Page 196 194 STARTING AND OPERATING...
  • Page 197: Tires - General Information

    STARTING AND OPERATING 195 Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
  • Page 198: Tire Inflation Pressures

    196 STARTING AND OPERATING Economy WARNING! (Continued) Underinflated tires will increase tire rolling resistance • Unequal tire pressures from one side of the vehicle resulting in higher fuel consumption. to the other can cause the vehicle to drift to the right or left.
  • Page 199 STARTING AND OPERATING 197 At least once a month: mile (1.6 km) after sitting for a minimum of three hours. The cold tire inflation pressure must not exceed the • Check and adjust tire pressure with a good quality maximum inflation pressure molded into the tire side- pocket-type pressure gauge.
  • Page 200: Tire Pressures For High Speed Operation

    198 STARTING AND OPERATING Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) WARNING! during operation. DO NOT reduce this normal pressure build up or your tire pressure will be too low. High speed driving with your vehicle under maxi- mum load is dangerous.
  • Page 201: Tire Types

    STARTING AND OPERATING 199 Tire Repair Tire Types If your tire becomes damaged, it may be repaired if it All Season Tires — If Equipped meets the following criteria: All Season tires provide traction for all seasons (spring, • The tire has not been driven on when flat. summer, fall and winter).
  • Page 202 200 STARTING AND OPERATING Summer tires do not contain the all season designation or Snow Tires mountain/snowflake symbol on the tire sidewall. Use Some areas of the country require the use of snow tires summer tires only in sets of four; failure to do so may during the winter.
  • Page 203: Run Flat Tires - If Equipped

    STARTING AND OPERATING 201 While studded tires improve performance on ice, skid See the tire pressure monitoring section for more infor- and traction capability on wet or dry surfaces may be mation. poorer than that of non-studded tires. Some states pro- Spare Tires —...
  • Page 204 202 STARTING AND OPERATING Spare Tire Matching Original Equipped Tire And Since this tire has limited tread life, the original equip- Wheel — If Equipped ment tire should be repaired (or replaced) and reinstalled on your vehicle at the first opportunity. Your vehicle may be equipped with a spare tire and wheel equivalent in look and function to the original Do not install a wheel cover or attempt to mount a...
  • Page 205 STARTING AND OPERATING 203 Full Size Spare — If Equipped your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the The full size spare is for temporary emergency use only. first opportunity. This tire may look like the originally equipped tire on the front or rear axle of your vehicle, but it is not.
  • Page 206: Tire Spinning

    204 STARTING AND OPERATING Tire Spinning Tread Wear Indicators When stuck in mud, sand, snow, or ice conditions, do not Tread wear indicators are in the original equipment tires spin your vehicle’s wheels above 30 mph (48 km/h) or to help you in determining when your tires should be for longer than 30 seconds continuously without stop- replaced.
  • Page 207: Life Of Tire

    STARTING AND OPERATING 205 • Performance tires, tires with a speed rating of V or These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth higher, and summer tires typically have a reduced becomes a 1/16 of an inch (2 mm).
  • Page 208: Replacement Tires

    206 STARTING AND OPERATING Replacement Tires affect your vehicle’s handling. If you ever replace a wheel, make sure that the wheel’s specifications match The tires on your new vehicle provide a balance of many those of the original wheels. characteristics. They should be inspected regularly for wear and correct cold tire inflation pressures.
  • Page 209: Tire Chains (Traction Devices)

    STARTING AND OPERATING 207 WARNING! (Continued) CAUTION! braking of your vehicle. This can cause unpredict- Replacing original tires with tires of a different size able handling and stress to steering and suspen- may result in false speedometer and odometer read- sion components.
  • Page 210: Tire Rotation Recommendations

    208 STARTING AND OPERATING CAUTION! CAUTION! (Continued) • Observe the traction device manufacturer’s instruc- To avoid damage to your vehicle or tires, observe the tions on the method of installation, operating following precautions: speed, and conditions for use. Always use the •...
  • Page 211: Tire Pressure Monitoring System (Tpms)

    Refer to “Tires – General Information” Alfa Romeo, in collaboration with Pirelli, developed a in “Starting and Operating” for information on how to specific high performance tire for the 4C model. A dedi- properly inflate the vehicle’s tires.
  • Page 212 210 STARTING AND OPERATING the recommended cold tire pressure in order for the Tire are inflated to the vehicle’s recommended cold tire pres- Pressure Monitoring Telltale Light to turn off. The system sure value. will automatically update and the Tire Pressure Monitor- ing Telltale Light will turn off once the system receives CAUTION! the updated tire pressures.
  • Page 213: Base System

    STARTING AND OPERATING 211 • The TPMS is not a substitute for proper tire mainte- CAUTION! (Continued) nance, and it is the driver’s responsibility to maintain • After inspecting or adjusting the tire pressure, correct tire pressure using an accurate tire gauge, even always reinstall the valve stem cap.
  • Page 214 212 STARTING AND OPERATING NOTE: It is particularly important for you to check the Pressure Monitoring Light will extinguish once the up- tire pressure in all of the tires on your vehicle regularly dated tire pressures have been received. The vehicle may and to maintain the proper pressure.
  • Page 215 STARTING AND OPERATING 213 2. Installing some form of aftermarket window tinting 3. However, after driving the vehicle for up to 20 min- that affects radio wave signals. utes above 15 mph (24 km/h), the Tire Pressure Monitoring Telltale Light will flash on and off for 75 3.
  • Page 216: General Information

    214 STARTING AND OPERATING General Information FUEL REQUIREMENTS — 1.750 Turbo This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the The 1.750 turbo engine is designed to meet following conditions: all emissions regulations and provide ex- cellent fuel economy and performance...
  • Page 217: Reformulated Gasoline

    STARTING AND OPERATING 215 Reformulated Gasoline CAUTION! Many areas of the country require the use of cleaner Do not use gasoline containing Methanol or E-85 burning gasoline referred to as “Reformulated Gasoline.” Ethanol. Use of these blends may result in starting Reformulated gasoline contain oxygenates and are spe- and drivability problems and may damage critical cifically blended to reduce vehicle emissions and im-...
  • Page 218: Materials Added To Fuel

    216 STARTING AND OPERATING vehicles. The manufacturer recommends that gasoline Fuel System Cautions without MMT be used in your vehicle. The MMT content of gasoline may not be indicated on the gasoline pump, CAUTION! therefore, you should ask your gasoline retailer whether Follow these guidelines to maintain your vehicle’s the gasoline contains MMT.
  • Page 219: Carbon Monoxide Warnings

    STARTING AND OPERATING 217 Carbon Monoxide Warnings CAUTION! (Continued) • The use of fuel additives, which are now being WARNING! sold as octane enhancers, is not recommended. Carbon monoxide (CO) in exhaust gases is deadly. Most of these products contain high concentrations Follow the precautions below to prevent carbon of methanol.
  • Page 220: Adding Fuel/Smart Fuel

    218 STARTING AND OPERATING ADDING FUEL/SMART FUEL NOTE: • The Smart Fuel is a device placed on the top of the filler pipe, it opens and closes automatically when the fuel nozzle is inserted or extracted. • Only the correct nozzle size diameter allows the flap door to open when the nozzle is inserted.
  • Page 221 STARTING AND OPERATING 219 4. At the end of refueling, before removing the nozzle, wait at least 10 seconds to allow the fuel to flow within the tank. 5. Remove the fuel nozzle from the filler pipe and then close the fuel door. Emergency Gas Can Refueling: Most gas cans will not open the flapper door.
  • Page 222 220 STARTING AND OPERATING CAUTION! To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. WARNING! • Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled.
  • Page 223: Trailer Towing

    STARTING AND OPERATING 221 TRAILER TOWING CAUTION! Trailer towing with this vehicle is not recommended. • DO NOT flat tow this vehicle. Damage to the drivetrain will result. RECREATIONAL TOWING (BEHIND • Do not dolly tow this vehicle. Use of a towing dolly MOTORHOME, ETC.) can cause significant damage to your vehicle.
  • Page 224 222 STARTING AND OPERATING Towing Condition Wheels OFF the Ground Alfa Twin Clutch Transmission Flat Tow None NOT ALLOWED Dolly Tow Front NOT ALLOWED Rear NOT ALLOWED On Trailer...
  • Page 225 WHAT TO DO IN EMERGENCIES CONTENTS ▫ Jump-Starting Procedure ....234 HAZARD WARNING FLASHER ...224 IF YOUR ENGINE OVERHEATS ... .224 FREEING A STUCK VEHICLE .
  • Page 226: Hazard Warning Flasher

    224 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the center console. potential for overheating by taking the appropriate ac- tion.
  • Page 227: Wheel And Tire Torque Specifications

    WHAT TO DO IN EMERGENCIES 225 CAUTION! WARNING! Driving with a hot cooling system could damage You or others can be badly burned by hot engine your vehicle. If the temperature gauge reads 240°F coolant (antifreeze) or steam from your radiator. If (116°C) or greater pull over and stop the vehicle.
  • Page 228: Torque Specifications

    72 Ft-Lbs (98 N·m) M12 x 1.25 17 mm **Use only Alfa Romeo recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles.
  • Page 229 WHAT TO DO IN EMERGENCIES 227 WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. Torque Patterns After 25 miles (40 km) check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated...
  • Page 230: Tire Service Kit

    228 WHAT TO DO IN EMERGENCIES TIRE SERVICE KIT If a tire is punctured, you can make a first emergency repair using the Tire Service Kit located in the rear storage area under the decklid. Tire punctures of up to 1/4” (6 mm) can be repaired; the kit can be used in all weather conditions.
  • Page 231 WHAT TO DO IN EMERGENCIES 229 WARNING! (Continued) WARNING! (Continued) • Do not use Tire Service Kit or drive the vehicle • A loose Tire Service Kit thrown forward in a under the following circumstances: collision or hard stop could endanger the occupants of the vehicle.
  • Page 232 230 WHAT TO DO IN EMERGENCIES Attach the clear flexible filling tube of the compressor WARNING! (Continued) directly to the tire valve and repeat the inflation process. • Tire Service Kit Sealant solution contains latex. In case When the correct pressure has been reached, start driving of an allergic reaction or rash, consult a physician the vehicle to uniformly distribute the sealant inside the immediately.
  • Page 233 WHAT TO DO IN EMERGENCIES 231 If the pressure is at 19 psi (1.3 bar) or above repeat the inflation process to reach the correct tire pressure and continue driving. Peel off the warning label from the bottle and place it on the dashboard as a reminder to the driver that the tire has been treated with Tire Service Kit.
  • Page 234: Jump-Starting

    232 WHAT TO DO IN EMERGENCIES JUMP-STARTING CAUTION! If your vehicle has a discharged battery it can be jump- Do not use a portable battery booster pack or any started using a set of jumper cables and a battery in other booster source with a system voltage greater another vehicle or by using a portable battery booster than 12 Volts or damage to the battery, starter motor,...
  • Page 235: Preparations For Jump-Start

    WHAT TO DO IN EMERGENCIES 233 Preparations For Jump-Start WARNING! The battery in your vehicle is located on the left side of • Remove any metal jewelry such as rings, watch the engine compartment. To access the battery remove bands and bracelets that could make an inadvertent the protective cover.
  • Page 236: Jump-Starting Procedure

    234 WHAT TO DO IN EMERGENCIES 4. If using another vehicle to jump-start the battery, park CAUTION! the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. Failure to follow these procedures could result in damage to the charging system of the booster vehicle WARNING! or the discharged vehicle.
  • Page 237 WHAT TO DO IN EMERGENCIES 235 Connecting The Jumper Cables WARNING! 1. Connect the positive (+) end of the jumper cable to the Do not connect the jumper cable to the negative (-) positive (+) post of the vehicle with the discharged post of the discharged battery.
  • Page 238: Freeing A Stuck Vehicle

    236 WHAT TO DO IN EMERGENCIES Disconnecting The Jumper Cables CAUTION! 1. Disconnect the negative (-) jumper cable from the Accessories plugged into the vehicle power outlets engine (-) ground of the vehicle with the discharged draw power from the vehicle’s battery, even when not battery.
  • Page 239 WHAT TO DO IN EMERGENCIES 237 CAUTION! CAUTION! • When “rocking” a stuck vehicle by shifting be- Racing the engine or spinning the wheels may lead to transmission overheating and failure. Allow the en- tween DRIVE and REVERSE, do not spin the gine to idle with the transmission in NEUTRAL for at wheels faster than 15 mph (24 km/h), or drivetrain least one minute after every five rocking-motion...
  • Page 240: Enhanced Accident Response System

    238 WHAT TO DO IN EMERGENCIES • Flash hazard lights as long as the battery has power or WARNING! until the ignition key is turned off. Fast spinning tires can be dangerous. Forces gener- • Turn on the interior lights, which remain on as long as the ated by excessive wheel speeds may cause damage, or battery has power or until the ignition key is removed.
  • Page 241 WHAT TO DO IN EMERGENCIES 239 In order to move your vehicle to the side of the road you Customer Action Customer Will See must follow the system reset procedure. 5. Turn Right Turn Signal Right Turn Light is ON Switch ON.
  • Page 242: Front Tow Eye Usage

    240 WHAT TO DO IN EMERGENCIES If a reset procedure step is not completed within 60 seconds, then the turn signal lights will turn off and the reset procedure must be performed again in order to be successful. FRONT TOW EYE USAGE Your vehicle is equipped with a tow eye that can be used to tow a disabled vehicle.
  • Page 243 WHAT TO DO IN EMERGENCIES 241 • Do not use the tow eye to pull the vehicle onto a flatbed truck. • Do not use the tow eye to free a stuck vehicle. Refer to “Freeing A Stuck Vehicle” in this section for further information.
  • Page 244 242 WHAT TO DO IN EMERGENCIES CAUTION! (Continued) code (a rigid bar or rope) to flat tow the vehicle for a short distance to the nearest service location. • Tow eyes MUST NOT be used to tow vehicles off the road or where there are obstacles. •...
  • Page 245: Fire Extinguisher - If Equipped

    WHAT TO DO IN EMERGENCIES 243 FIRE EXTINGUISHER — IF EQUIPPED The fire extinguisher is located under the dashboard in front of the passenger side seat. Fire Extinguisher...
  • Page 247 MAINTAINING YOUR VEHICLE CONTENTS ▫ Air Conditioner Maintenance ... . .255 ENGINE COMPARTMENT — 1.750 TURBO . . .247 ▫ Body Lubrication .....256 ONBOARD DIAGNOSTIC SYSTEM —...
  • Page 248 246 MAINTAINING YOUR VEHICLE ▫ Appearance Care And Protection From ▫ Tail Lights/Brake Lights ....298 Corrosion ......277 ▫...
  • Page 249: Engine Compartment - 1.750 Turbo

    MAINTAINING YOUR VEHICLE 247 ENGINE COMPARTMENT — 1.750 TURBO 1 — Fuse Box 3 — Engine Oil Dip Stick 5 — Coolant Reservoir 2 — Battery 4 — Engine Oil Fill...
  • Page 250: Onboard Diagnostic System - Obd Ii

    248 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and Alfa Twin could also affect fuel economy and driveability.
  • Page 251: Dealer Service

    MAINTAINING YOUR VEHICLE 249 DEALER SERVICE MAINTENANCE PROCEDURES Your authorized dealer has the qualified service person- The pages that follow contain the required maintenance nel, special tools, and equipment to perform all service services determined by the engineers who designed your operations in an expert manner.
  • Page 252: Engine Oil

    250 MAINTAINING YOUR VEHICLE regular intervals. The best time to check the engine oil CAUTION! (Continued) level is before starting the engine after it has sat over- • Your vehicle has been built with improved fluids night. that protect the performance and durability of your Do not check oil level when the engine is warm.
  • Page 253 MAINTAINING YOUR VEHICLE 251 Engine Oil Selection CAUTION! For best performance and maximum protection for tur- Do not overfill the engine with oil. Overfilling the bocharged engines under all types of operating condi- engine with oil will cause oil aeration, which can tions, the manufacturer recommends synthetic engine lead to loss of oil pressure and an increase in oil oils that are API Certified and meet the requirements of...
  • Page 254: Engine Oil Filter

    252 MAINTAINING YOUR VEHICLE Materials Added To Engine Oil Engine Oil Filter The manufacturer strongly recommends against the ad- The engine oil filter should be replaced with a new filter dition of any additives (other than leak detection dyes) to at every engine oil change.
  • Page 255: Engine Cover

    MAINTAINING YOUR VEHICLE 253 Engine Cover WARNING! To avoid possible damage to the engine cover, please The air induction system (air cleaner, hoses, etc.) can disconnect each of the four mounting studs by pulling provide a measure of protection in the case of engine the engine cover upward, and then lift off the complete backfire.
  • Page 256: Maintenance-Free Battery

    254 MAINTAINING YOUR VEHICLE Maintenance-Free Battery WARNING! (Continued) Your vehicle is equipped with a maintenance-free battery. an output greater than 12 Volts. Do not allow cable You will never have to add water, nor is periodic main- clamps to touch each other. tenance required.
  • Page 257: Air Conditioner Maintenance

    MAINTAINING YOUR VEHICLE 255 NOTE: CAUTION! (Continued) • Use only refrigerants and compressor lubricants ap- battery case. Cable clamps should be tight on the proved by the manufacturer for your air conditioning terminal posts and free of corrosion. system. Some unapproved refrigerants are flammable •...
  • Page 258: Body Lubrication

    256 MAINTAINING YOUR VEHICLE Body Lubrication CAUTION! Locks and all body pivot points, including such items as Do not use chemical flushes in your air conditioning seat tracks, door hinge pivot points and rollers, liftgate, system as the chemicals can damage your air condi- tailgate, decklid, sliding doors and hood hinges, should tioning components.
  • Page 259: Wiper Blades

    MAINTAINING YOUR VEHICLE 257 Wiper Blades NOTE: Life expectancy of wiper blades varies depending on geographical area and frequency of use. Poor perfor- Clean the rubber edges of the wiper blades and the mance of blades may be present with chattering, marks, windshield and rear window periodically with a sponge water lines or wet spots.
  • Page 260 258 MAINTAINING YOUR VEHICLE NOTE: The previous operation can be repeated up to three times. In order to move the blades to the most suitable position. 4. Lift the blade from the windshield and proceed with the required operation. 5. Carefully lower the blade, bringing it back in contact with the windshield.
  • Page 261: Windshield Washer Nozzles

    MAINTAINING YOUR VEHICLE 259 3. Push the wiper blade up the and remove it. Windshield Washer Nozzles The windshield washer nozzles are adjustable. They originally adjusted at the factory. Should it be necessary to adjust them again, contact your authorized Alfa Ro- meo Dealer.
  • Page 262: Adding Washer Solvent

    260 MAINTAINING YOUR VEHICLE Adding Washer Solvent 1. To avoid any interference during the procedure, lift the windshield wiper blade. 2. Loosen the four screws using the supplied screw- driver. Remove the washer solvent protection panel. 1 — Brake Fluid Protection Panel 2 —...
  • Page 263 MAINTAINING YOUR VEHICLE 261 4. Leaving the plug close to the opening, put a finger on the central hole in the plug and remove it: the level can be seen on the control pipe due to capillarity. Washer Solvent Dip Stick 5.
  • Page 264 262 MAINTAINING YOUR VEHICLE If the level is not sufficient, namely if there is no washer solvent inside the pipe, proceed as follows: 1. To avoid any interference during the procedure, lift the windshield wiper blade. 2. Loosen the four screws using the supplied screw- driver.
  • Page 265: Exhaust System

    MAINTAINING YOUR VEHICLE 263 exhaust system inspected each time the vehicle is raised WARNING! for lubrication or oil change. Replace as required. Commercially available windshield washer solvents WARNING! are flammable. They could ignite and burn you. Care must be exercised when filling or working around •...
  • Page 266 264 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- CAUTION! verter will not require maintenance. However, it is im- • The catalytic converter requires the use of un- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst leaded fuel only.
  • Page 267: Cooling System

    MAINTAINING YOUR VEHICLE 265 To minimize the possibility of catalytic converter dam- Cooling System age: WARNING! • Do not shut off the engine or interrupt the ignition, when the transmission is in gear and the vehicle is in • When working near the radiator cooling fan, dis- motion.
  • Page 268 266 MAINTAINING YOUR VEHICLE Coolant Checks If the engine coolant (antifreeze) is dirty or contains visible sediment, have an authorized dealer clean and Check engine coolant (antifreeze) protection every 12 flush with OAT coolant (antifreeze) (conforming to months (before the onset of freezing weather, where MS.90032).
  • Page 269 MAINTAINING YOUR VEHICLE 267 CAUTION! CAUTION! (Continued) rust inhibitors or antirust products, as they may not • Mixing of engine coolant (antifreeze) other than be compatible with the radiator engine coolant and specified Organic Additive Technology (OAT) en- may plug the radiator. gine coolant (antifreeze), may result in engine •...
  • Page 270 268 MAINTAINING YOUR VEHICLE Please review these recommendations for using Organic Please note that it is the owner’s responsibility to main- Additive Technology (OAT) engine coolant (antifreeze) tain the proper level of protection against freezing ac- that meets the requirements of Chrysler Material Stan- cording to the temperatures occurring in the area where dard MS.90032.
  • Page 271 MAINTAINING YOUR VEHICLE 269 Cooling System Pressure Cap WARNING! (Continued) The cap must be fully tightened to prevent loss of engine • Do not use a pressure cap other than the one coolant (antifreeze) and to ensure that engine coolant specified for your vehicle.
  • Page 272 270 MAINTAINING YOUR VEHICLE Coolant Level Points To Remember The coolant expansion bottle provides a quick visual NOTE: When the vehicle is stopped after a few miles/ method for determining that the coolant level is ad- kilometers of operation, you may observe vapor coming equate.
  • Page 273: Brake System

    MAINTAINING YOUR VEHICLE 271 • If frequent engine coolant (antifreeze) additions are Brake System required, the cooling system should be pressure tested In order to assure brake system performance, all brake for leaks. system components should be inspected periodically. • Maintain engine coolant (antifreeze) concentration at a Refer to the “Maintenance Schedule”...
  • Page 274 272 MAINTAINING YOUR VEHICLE Be sure to clean the top of the master cylinder area before WARNING! (Continued) removing the cap. If necessary, add fluid to bring the impair its performance. The proper type of brake fluid level up to the requirements described on the brake fluid for your vehicle is also identified on the fluid reservoir.
  • Page 275 MAINTAINING YOUR VEHICLE 273 Checking Brake Fluid WARNING! (Continued) damage painted and vinyl surfaces, care should be taken to avoid its contact with these surfaces. • Do not allow petroleum-based fluid to contaminate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure.
  • Page 276 274 MAINTAINING YOUR VEHICLE To check the brake fluid level, proceed as follows: 2. Check that the fluid is at the max. level. 1. Loosen the two screws and remove the brake fluid 3. After checking, reposition the brake fluid protection protection panel.
  • Page 277: Alfa Twin Clutch Transmission

    MAINTAINING YOUR VEHICLE 275 NOTE: Be very careful while removing the plug from the opening to prevent the plug from falling inside the vehicle body. Alfa Twin Clutch Transmission Selection Of Lubricant It is important to use the proper transmission fluid to ensure optimum transmission performance and life.
  • Page 278 276 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! Using a transmission fluid other than the manufac- Do not use chemical flushes in your transmission as turer’s recommended fluid may cause deterioration the chemicals can damage your transmission compo- in transmission shift quality. Refer to “Fluids, Lubri- nents.
  • Page 279: Appearance Care And Protection From

    MAINTAINING YOUR VEHICLE 277 trees and road surfaces during other seasons are highly CAUTION! corrosive to the metal in your vehicle. Outside parking, which exposes your vehicle to airborne contaminants, If a transmission fluid leak occurs, visit your autho- road surfaces on which the vehicle is operated, extreme rized dealer immediately.
  • Page 280 278 MAINTAINING YOUR VEHICLE • Insects, tree sap and tar. • Avoid using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish. • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants. NOTE: Hand washing is recommended.
  • Page 281 MAINTAINING YOUR VEHICLE 279 • If you carry special cargo such as chemicals, fertilizers, Special Care de-icer salt, etc., be sure that such materials are well • If you drive on salted or dusty roads or if you drive packaged and sealed. near the ocean, hose off the undercarriage at least once •...
  • Page 282 280 MAINTAINING YOUR VEHICLE NOTE: If your vehicle is equipped with Dark Vapor or Stain Repel Fabric Cleaning Procedure — If Black Satin Chrome wheels DO NOT USE wheel cleaners, Equipped abrasives or polishing compounds. They will perma- Stain Repel seats may be cleaned in the following man- nently damage this finish and such damage is not cov- ner: ered by the New Vehicle Limited Warranty.
  • Page 283 MAINTAINING YOUR VEHICLE 281 Interior Care WARNING! Use MOPAR® Total Clean to clean fabric upholstery and Do not use volatile solvents for cleaning purposes. carpeting. Many are potentially flammable, and if used in Use MOPAR® Total Clean to clean vinyl upholstery. closed areas they may cause respiratory harm.
  • Page 284 282 MAINTAINING YOUR VEHICLE To minimize the possibility of scratching the lenses and When cleaning the rear view mirror, spray cleaner on the reducing light output, avoid wiping with a dry cloth. To towel or rag that you are using. Do not spray cleaner remove road dirt, wash with a mild soap solution fol- directly on the mirror.
  • Page 285 MAINTAINING YOUR VEHICLE 283 Cleaning Plastic Instrument Cluster Lenses Replace the belts if they appear frayed or worn or if the buckles do not work properly. The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care WARNING! must be taken to avoid scratching the plastic.
  • Page 286: Fuses

    284 MAINTAINING YOUR VEHICLE FUSES WARNING! (Continued) • If a general protection fuse for safety systems (air WARNING! bag system, braking system), power unit systems • When replacing a blown fuse, always use an ap- (engine system, gearbox system) or steering system propriate replacement fuse with the same amp blows, contact an authorized dealer.
  • Page 287: Engine Compartment Fuses

    MAINTAINING YOUR VEHICLE 285 Engine Compartment Fuses The engine compartment fuse box is located on the left side of the engine compartment, next to the battery. To access the fuses, remove screws and then remove the cover. Engine Compartment Fuse Box 1 —...
  • Page 288 286 MAINTAINING YOUR VEHICLE Cavity Maxi Fuse Mini Fuse Description 70 Amp Tan Body Controller 20 Amp Yellow Ignition Switch 40 Amp Orange Anti-Lock Brake Pump 20 Amp Yellow Anti-Lock Brake Valve 40 Amp Orange Radiator Fan - Low Speed 50 Amp Red Radiator Fan - High Speed 20 Amp Yellow...
  • Page 289 MAINTAINING YOUR VEHICLE 287 Cavity Maxi Fuse Mini Fuse Description 7.5 Amp Brown Air Conditioning Compressor 20 Amp Yellow Fuel Pump 20 Amp Yellow Engine Control Unit Power Supply 5 Amp Tan Anti-Lock Brake System (ABS) 10 Amp Red Water Pump, HVAC 30 Amp Green Headlamp Washer (If Equipped) 40 Amp Orange...
  • Page 290: Dashboard Fuse Box

    288 MAINTAINING YOUR VEHICLE Dashboard Fuse Box The dashboard fuse box is part of the Body Control Module (BCM) and is located on the passenger side under the forward passenger floor. Remove the six screws and the forward floor pan to access the BCM. Vehicle Fuse Cavity Mini Fuse...
  • Page 291: Vehicle Storage

    MAINTAINING YOUR VEHICLE 289 Vehicle Fuse Cavity Mini Fuse Description Number 5 Amp Tan Transmission Shifter Module, Cigar Lighter Light, Drive Style Unit, Heated Mirrors Relay 5 Amp Tan Climate Control, Body Controller 20 Amp Yellow Driver Power Window ensure adequate system lubrication to minimize the VEHICLE STORAGE possibility of compressor damage when the system is If you are leaving your vehicle dormant for more than 21...
  • Page 292 290 MAINTAINING YOUR VEHICLE Exterior Bulbs Bulb Number Bulb Number Headlights) — If Equipped Parking Lights/Daytime LED (See Authorized Front Direction Indicators PY24W Running Lights (DRL) dealer) Rear Direction Indicators P21W Rear Tail Lights LED (See Authorized Side Direction Indicators WY5W dealer) Brake Lights...
  • Page 293: Bulb Replacement

    MAINTAINING YOUR VEHICLE 291 BULB REPLACEMENT NOTE: Lens fogging can occur under certain atmo- spheric conditions. This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the lamps on will usually accelerate the clearing process.
  • Page 294 292 MAINTAINING YOUR VEHICLE Side Lights/Daytime Running Lights (DRL) These are LEDs. For the replacement, contact the your authorized dealer. Low/High Beam Bi-Halogen Headlights To change the bulb, proceed as follows: 1. Turn the steering wheel completely. 2. Open the protective flap by rotating the screw. 1 —...
  • Page 295 MAINTAINING YOUR VEHICLE 293 3. Remove the electric connector (1) and then rotate the 4. Extract the bulb and replace it. bulb holder (2) clockwise and remove it. 5. Refit the new bulb, making sure that it is locked correctly, and reconnect the electrical connector. 6.
  • Page 296 294 MAINTAINING YOUR VEHICLE 4. Rotate the bulb assembly counter clockwise to remove from bulb holder. 5. Install the new bulb, making sure that it is locked in correctly, and reinstall into headlamp assembly. 1 — Direction Indicator Bulb Protective Flap 2 —...
  • Page 297 MAINTAINING YOUR VEHICLE 295 Side: 1. Adjust the lens in the point shown in to compress the retaining clip, then pull the cluster outwards. 2. Turn the bulb holder counterclockwise, remove the bulb and replace it. 3. Install the bulb holder in the lens and turn it clock- wise.
  • Page 298: Front Side Marker

    296 MAINTAINING YOUR VEHICLE Front Side Marker 2. Fold back wheel liner door to access bulb housing. To change the bulb, proceed as follows: 1. Turn the front wheels to gain access and then remove the fastener from the inner wheel liner. Bulb Housing Location Fastener Location...
  • Page 299: Rear Light Clusters

    MAINTAINING YOUR VEHICLE 297 3. Remove bulb from bulb housing then remove and Direction Indicators replace bulb and reinstall. To change the bulb, proceed as follows: 1. Remove the protective cap (one for each side) on the side cover of the luggage compartment. Front Side Marker Bulb Rear Light Clusters These contain the bulbs for the side lights, direction...
  • Page 300: Tail Lights/Brake Lights

    298 MAINTAINING YOUR VEHICLE 2. Remove the second protective cap inserting a hand 4. Install the bulb by pressing it into bulb holder then inside the opening. turn install the bulb holder and turn it counterclock- wise. 5. Install the previously removed protective caps. Tail Lights/Brake Lights These are LEDs.
  • Page 301: Third Brake Lights

    MAINTAINING YOUR VEHICLE 299 To replace the reversing lights turn the bulb holder counterclockwise, remove the bulb and replace it. Reversing Light Bulb Holder Third Brake Lights 1 — Reverse Light Location These are LEDs. For the replacement, contact your local 2 —...
  • Page 302: License Plate Lights

    300 MAINTAINING YOUR VEHICLE License Plate Lights 2. Turn bulb holder (1) counterclockwise, remove bulb (2) and replace it. To replace the bulbs proceed as follows: 1. Position the lens in the point shown laterally to compress the retaining clip, then pull the license plate light cluster out.
  • Page 303: Roof Light

    MAINTAINING YOUR VEHICLE 301 Roof Light 2. Open protective flap (2) and replace bulb (1), releasing it from the side contacts. Make sure that the new bulb To change the bulb, proceed as follows: is correctly secured between the contacts. 1.
  • Page 304: Luggage Compartment Roof Light

    302 MAINTAINING YOUR VEHICLE Luggage Compartment Roof Light To replace the bulb, proceed as follows: 1. Open the luggage compartment and remove luggage compartment roof light, working in the direction shown by the arrow. 1 — Light Cover 2 — Light Protector 2.
  • Page 305: Fluid Capacities

    MAINTAINING YOUR VEHICLE 303 4. Install luggage compartment roof light by inserting it in its correct position, first on one side and then pressing on the other side until it clicks into place. FLUID CAPACITIES U.S. Metric Fuel (Approximate) 1.750 Turbo Engine 10.5 Gallons 40 Liters Reserve Fuel...
  • Page 306: Fluids, Lubricants And Genuine Parts

    304 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant - 1.750 Turbo Engine We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Chrysler Material Standard MS.90032.
  • Page 307: Chassis

    For spark plug replacement, it is advis- able to contact the dedicated Alfa Romeo Dealership. Refer to the “Maintenance Schedule” section for the required spark plug intervals.
  • Page 309 MAINTENANCE SCHEDULES CONTENTS ▫ Maintenance Chart ....311 MAINTENANCE SCHEDULE ... . .308...
  • Page 310 308 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE The Wrench Warning Light may appear in the cluster as a service reminder when vehicle maintenance is required, Your vehicle is equipped with an automatic oil change according to the scheduled maintenance mileage. The indicator system. The oil change indicator system will maintenance schedule intervals are set by the manufac- remind you that it is time to take your vehicle in for turer.
  • Page 311 MAINTENANCE SCHEDULES 309 • Allowing the engine to idle for extended periods of • Check battery charge and battery fluid level (electro- time lyte) • Driving for long distances at low speeds • Visually inspect condition of the auxiliary drive belts •...
  • Page 312 310 MAINTENANCE SCHEDULES Once A Month Or Before A Long Trip/Periodic Checks Required Maintenance Intervals Every 600 miles (1,000 km) or before long trips, check Refer to the maintenance schedules on the following and, if necessary, top off the following: page for the required maintenance intervals.
  • Page 313 MAINTENANCE SCHEDULES 311 Maintenance Chart Mileage or time passed (whichever comes first) Or Months: Or Kilometers: Check battery charge status and possibly recharge ⌂ Check tire condition/wear and adjust pressure if required Check lighting system operation (headlights, direction indicators, hazard lights, passenger compartment lights, boot lights, instrument panel warning lights, etc.) Check vehicle fasteners Check mechanical components fasteners...
  • Page 314 312 MAINTENANCE SCHEDULES Mileage or time passed (whichever comes first) Or Months: Or Kilometers: Check cleanliness of hood and deck lid locks, as well as cleanli- ness and lubrication of associated linkages Visually inspect condition of: exterior bodywork, carbon monocoque, aerodynamic bottom, pipes and hoses (exhaust, fuel supply system, brakes), rubber elements (boots, driveshaft boots, sleeves, bushes, etc.)
  • Page 315 MAINTENANCE SCHEDULES 313 Mileage or time passed (whichever comes first) Or Months: Or Kilometers: Check condition of timing belt Check handbrake lever travel and adjust, if necessary (or every 12 months) Check exhaust gas emissions, or as required by applicable laws Check engine control system operation (via diagnostic tool) Check and, if necessary, top off oil level of dual clutch automatic transmission...
  • Page 316 (#) The spark plug change interval is mileage based only, • Contact your Alfa Romeo Dealer if you have questions. yearly intervals do not apply. The following are essential to ensure correct operation and prevent serious damage...
  • Page 317 MAINTENANCE SCHEDULES 315 (**) The actual interval for changing the oil and replacing WARNING! the engine oil filter depends on the vehicle usage condi- • You can be badly injured working on or around a tions and is signalled by the warning light or message (if present) on the instrument panel or every 12 months.
  • Page 319 IF YOU NEED CONSUMER ASSISTANCE CONTENTS SUGGESTIONS FOR OBTAINING SERVICE FOR WARRANTY INFORMATION ... . .321 YOUR VEHICLE ..... . .318 REPORTING SAFETY DEFECTS .
  • Page 320: Suggestions For Obtaining Service For Your Vehicle

    318 IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
  • Page 321: Alfa Customer Center

    IF YOU NEED CONSUMER ASSISTANCE 319 • Authorized dealer name facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized Alfa Customer Center dealer service manager first.
  • Page 322: Service Contract

    320 IF YOU NEED CONSUMER ASSISTANCE (TTY) in the United States, can communicate with the Hotline at 1-800-521-9922 (Canadian residents, call (800) manufacturer by dialing 1–800–380–CHRY. 465–2001 English / (800) 387–9983 French). Canadian residents with hearing difficulties that require The manufacturer will not stand behind any service assistance can use the special needs relay service offered contract that is not the manufacturer’s service contract.
  • Page 323: Warranty Information

    However, NHTSA cannot become involved in WARRANTY INFORMATION individual problems between you, your authorized dealer, and the manufacturer. See the Warranty Information Booklet, located on the USB card, for the terms and provisions of ALFA ROMEO Automobiles warranties applicable to this vehicle and market.
  • Page 324: In Canada

    322 IF YOU NEED CONSUMER ASSISTANCE To contact NHTSA, you may either call the Auto Safety PUBLICATION ORDER FORMS Hotline toll free at 1–888–327–4236 (TTY: 1–800– To order the following manuals, you may use either the 424–9153), or go to http://www.safercar.gov; or write to: website or the phone numbers listed below.
  • Page 325: Department Of Transportation Uniform Tire Quality Grades

    IF YOU NEED CONSUMER ASSISTANCE 323 • Call toll free at: Diagnostic Procedure Manuals Diagnostic Procedure Manuals are filled with diagrams, 1–800–890–4038 (U.S.) charts and detailed illustrations. These practical manuals 1–800–387–1143 (Canada) make it easy for students and technicians to find and fix problems on computer-controlled vehicle systems and features.
  • Page 326: Treadwear

    324 IF YOU NEED CONSUMER ASSISTANCE Treadwear WARNING! The Treadwear grade is a comparative rating, based on The traction grade assigned to this tire is based on the wear rate of the tire when tested under controlled straight-ahead braking traction tests, and does not conditions on a specified government test course.
  • Page 327 IF YOU NEED CONSUMER ASSISTANCE 325 WARNING! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, or excessive load- ing, either separately or in combination, can cause heat buildup and possible tire failure.
  • Page 329 INDEX...
  • Page 330 328 INDEX Adding Engine Coolant (Antifreeze) ... .267 Alterations/Modifications, Vehicle ....8 Adding Fuel ......218 Antifreeze (Engine Coolant).
  • Page 331 INDEX 329 Brake, Parking ......172 Checking Your Vehicle For Safety ....66 Brakes .
  • Page 332 330 INDEX Inspection ......270 Child-Protection Door Lock — Rear Doors ..23 Points to Remember .
  • Page 333 INDEX 331 Change Engine Oil ..... .137 Time Adjustment (Clock) ....130 Change Engine Oil Indicator System .
  • Page 334 332 INDEX Fails to Start ......155 Engine Oil ......252 Flooded, Starting .
  • Page 335 INDEX 333 Octane Rating ......214 Passing .......85 Requirements .
  • Page 336 334 INDEX Interior Lights ......87 Life of Tires ......205 Intermittent Wipers (Delay Wipers) .
  • Page 337 INDEX 335 Auto Unlock ......23 Modifications/Alterations, Vehicle ....8 Door .
  • Page 338 336 INDEX Onboard Diagnostic System ....248 Seat Belts ......38 Operating Precautions .
  • Page 339 INDEX 337 Restraints, Child ......55 Front Seat ......31 Restraints, Infant .
  • Page 340 338 INDEX Snow Tires ......200 Tire and Loading Information Placard ..190, 191 Spare Tire .
  • Page 341 INDEX 339 Sizes ....... .185 Transporting Passengers .....66 Snow Tires .
  • Page 342 340 INDEX Washer Adding Fluid ......260 Washers, Windshield......89 Washing Vehicle .
  • Page 343 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT The antenna cable should be as short as practical and routed away from the vehicle wiring when possible. Use Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio only fully shielded coaxial cable. frequency signals.
  • Page 344 Chrysler Group LLC 154C-126-AC 154C-126-AB Second Edition Printed in U.S.A. Third Edition Rev. 1 Printed in U.S.A.

Table of Contents