Alfa Romeo 4C Spider 2020 Owner's Manual page 56

Speed Buzzer (Speed Limit)
With this function, it is possible to set the vehicle speed limit
(mph or km/h) to immediately alert the driver when the set
limit is exceeded.
To set the speed limit, proceed as follows:
1. Briefly push the SET/BACK button. The display will
show the message (Speed Buzzer).
2. Push and release the up or down arrow button to select
speed limit activation (On) or deactivation (Off).
3. When the function is activated (On), briefly push the
SET/BACK button to display the previously set speed.
Pushing the up or down arrow buttons selects the speed
limit. Push SET/BACK to confirm selection.
NOTE:
The setting can be increased or decreased by 5 mph or km/h
each time the up or down arrow button is pushed for speed
settings above 20 mph (32 km/h). To increase or decrease the
set speed rapidly, push and hold the up or down arrow
button. Save the setting by briefly pushing the button when
you approach the required setting.
Briefly push the SET/BACK button to go back to the menu
screen, or push and hold the SET/BACK button (approxi-
mately one second) to go back to the main screen without
storing the settings.
GETTING TO KNOW YOUR INSTRUMENT PANEL
To cancel the setting, proceed as follows:
1. Briefly push the SET/BACK button, "On" will display.
2. Push and release the down button, "Off" will display.
3. Briefly push the SET/BACK button to go back to the
menu screen, or push and hold the SET/BACK button
(approximately one second) to go back to the main screen
without storing the settings.
Trip B Activation
Through this option, it is possible to activate (On) or deacti-
vate (Off) the Trip B (partial trip) display.
For further information, see "Trip Computer."
For activation/deactivation, proceed as follows:
1. Briefly push the SET/BACK button. "On" or "Off" will
display in the instrument cluster display (according to
previous setting).
2. Push and release the up or down arrow button to select
the setting and once selected a beep will occur to signal
the setting is saved.
3. Briefly push the SET/BACK button to go back to the
menu screen, or push and hold the SET/BACK button
(approximately one second) to go back to the main screen
without storing the settings.
53
3