Starting And Operating; Starting The Engine; Automatic Transmission; Normal Starting - Alfa Romeo 4C Spider 2020 Owner's Manual

Hide thumbs Also See for 4C Spider 2020:
Table of Contents

Advertisement

106

STARTING THE ENGINE

Before starting your vehicle, adjust your seat, adjust both
inside and outside mirrors, and fasten your seat belts.
WARNING!
• Never leave children alone in a vehicle, or with access
to an unlocked vehicle.
• Allowing children to be in a vehicle unattended is
dangerous for a number of reasons. A child or others
could be seriously or fatally injured. Children should
be warned not to touch the parking brake, brake pedal
or the transmission gear selector.
• Do not leave the key fob in or near the vehicle (or in a
location accessible to children). A child could operate
power windows, other controls, or move the vehicle.

Automatic Transmission

To start the engine, press the brake pedal. The system
engages NEUTRAL (N) automatically.
After the starting procedure, FIRST (1st) gear or REVERSE
(R) can be engaged.
Regardless of the mode selected (AUTO/MANUAL), to
engage FIRST (1st) gear or REVERSE (R), it is necessary to
press the brake pedal and push the 1 button on the transmis-

STARTING AND OPERATING

sion control panel (or the "+" steering wheel stalk) to engage
FIRST (1st) gear or the R button to engage REVERSE (R).
When FIRST (1st) gear is engaged, the system sets itself to
AUTO mode.
NEUTRAL (N) can be engaged again by pushing the N
button with the brake pedal pressed.
When the 1, N, or R buttons are pushed (or "+" steering
wheel stalk is operated) without pressing the brake pedal, no
gear change request is implemented by the system.
NOTE:
REVERSE (R) cannot be engaged by pushing the "-" stalk on
the steering wheel.

Normal Starting

NOTE:
Normal starting of either a cold or a warm engine is obtained
without pumping or pressing the accelerator pedal.
Turn the ignition switch to the AVV (START) position and
release it when the engine starts. If the engine fails to start
within 10 seconds, turn the ignition switch to the STOP
(OFF/LOCK) position, wait 10 to 15 seconds, then repeat the
"Normal Starting" procedure.

Advertisement

Table of Contents
loading

Table of Contents