Alfa Romeo 4C Spider 2020 Owner's Manual page 35

32 GETTING TO KNOW YOUR VEHICLE
Window Demisting
In the event of considerable external moisture and/or rain
and/or large differences in temperature inside and outside
the passenger compartment, perform the following preven-
tive window demisting procedure:
1. Move the Recirculation Control to
2. Rotate the Temperature Control to the red section.
3. Turn the Blower Control to "2" (intermediate fan speed).
4. Turn the Mode Control to
moving it to position
occur.
Ventilation
To ventilate the passenger compartment properly, proceed
as follows:
1. Fully open the vents and direct them appropriately.
2. Rotate the Temperature Control to the blue section.
3. Move the Recirculation Control to
4. Turn the Blower Control to the desired speed.
5. Turn the Mode Control to
.
with the possibility of
if window misting does not
.
.
Internal Air Recirculation Activation
Slide the Recirculation knob to the
It is advisable to turn the Internal Air Recirculation on while
the vehicle is at a standstill, or in tunnels, to prevent the
introduction of polluted air.
Do not use the function for a long time, particularly if there
are two people inside the vehicle, to prevent the windows
from misting.
NOTE:
The internal air recirculation system makes it possible to
reach the required heating or ventilation conditions more
quickly. Do not use the internal air recirculation function on
rainy/cold days to avoid the possibility of the windows
misting.
Climate Control
Proceed as follows:
1. Rotate the Temperature Control to the blue section.
2. Turn the Blower Control to "1" (first fan speed). For rapid
cooling, turn Blower Control to "4" (maximum fan
speed).
3. Move the Recirculation Control to
4. Turn the Mode Control to
5. Push the A/C button.
position.
.
.