General Information; Introduction And Description; Owner Assistance; Equipment Supplied - Acom 1010 User Manual

User's Manual | ACOM 1010 | HF Linear Amplifier

1. GENERAL INFORMATION

Congratulations on purchasing one of the finest HF amplifiers in the world today.
ACOM is pleased that you have chosen one of our products, and we will endeavor to provide you with the
information and support you need to enjoy your purchase for many years.
We urge you to read all of the following materials before you embark on operating your new amplifier.

1.1. Introduction and Description

This manual explains:
Installation
•
Operation and
•
Maintenance
•
of the ACOM 1010 HF linear amplifier.
The ACOM 1010 is a self-contained linear amplifier that covers all amateur bands, from 1.8 through
29.7MHz. It provides over 700W PEP of output power (or 500W in continuous-duty operation) with less
than 60W of drive. The amplifier is designed to tolerate VSWR levels of up to 3:1 throughout its operating
range, and tuning is simplified by ACOM's exclusive True Resistance Indicator (TRI). Also, a built-in antenna
selector switch with two outputs is included to provide instant choice of antennas. Importantly, a variety of
system parameters are continuously monitored and available to the operator to assure safe and efficient
amplifier operation.

1.2. Owner Assistance

If assistance is needed, you should contact your local dealer first. If necessary, your dealer will contact ACOM
for additional guidance.
If you still have an issue you need to discuss with one of ACOM's specialists, the contact information is as
follows:

1.3. Equipment Supplied

The ACOM 1010 amplifier and this User's Manual are shipped in a cardboard carton.
August 2020
ACOM Ltd.
E-mail: support@acom-bg.com
Bulgaria | Bozhurishte 2227
Sofia-Bozhurishte Economic Zone | 6 Valeri Petrov Str.
GPS coordinates: 42.748616
о о
| 23.209801
S e c t i o n GENERAL INFORMATION | Page 7 of 32