Table of Contents
Advertisement
Install the Driver
The driver can be installed on a DIN rail, or it can be mounted on a panel or wall
by using the provided adapter.
Mount the Driver on the Housing or Panel
The driver can be directly mounted on the panel.
When attaching to panels or mounts, make sure the surface is strong and
TIP
flat.
Attach the driver to the panel mounting plate and affix with the provided four
screws (M4 x 12 mm).
Rockwell Automation Publication ICM-UM004C-EN-E - February 2014
Installation
Terminal Arrangement
Terminal No.
Signal
1
OUTPUT
2
COM
3
-24 V
4
Shield (COM)
Chapter 1
25
Advertisement
Table of Contents
