Table Of Default Settings - Alphasmart NEO 2 User Manual

C N E O S
H A N G I N G
Restoring Default Settings
Table of Defaul t Settings
System settings
Startup SmartApplet
Auto Repeat
Sticky Keys
Keyboard Layout
Idle Time
Slow Keys
Slow Key Delay
Reset System Font to Default
Transfer Speed
IR Transfer Speed
Master Password
Printer Selection
Two-button ON
AlphaWord Plus settings
Disable this SmartApplet
Passwords Enabled
58
E T T I N G S
4. A dialog box will ask you to choose whether to restore the default settings
for just the selected SmartApplet or for all SmartApplets (including the
System settings). Click one of the options; then, click OK.
If you chose to restore default settings for just one SmartApplet, that
SmartApplet and all settings will be checked. If you chose to restore
default settings for all SmartApplets, all of them will be checked, including
the System settings. All settings will be changed to the default settings.
5. Click the Send List tab and verify that the settings you want to transfer
appear in the list.
6. Click Send. If you have set a send list password (see page 63), you must
enter the password and click OK.
The following table lists the default settings for the NEO system and
SmartApplets.
Setting Name Default
AlphaWord Plus
On
Off
QWERTY
4 minutes
Off
0 seconds
Off
Fast
Fastest
***** (Set your own)
HP Printer
Off
No
Off
AlphaSmart Manager 2 User Manual