Changing Smartapplet Settings; How To Change Settings For Smartapplets In Alphasmart Manager - Alphasmart NEO 2 User Manual

C N E O S
H A N G I N G

Changing SmartApplet Settings

C h a n g i n g S m a r t A p p l e t S e t t i n g s
How t o Change Settings for SmartApplets in AlphaSmart Manager
If you include setting
changes for a
SmartApplet in a
saved send list (see
page 62), and you are using
or installing a newer version of
the SmartApplet the next time
you open the send list, the
setting changes won't be
used. Setting changes only
apply to the version of the
SmartApplet that you were
using when you selected the
settings.
52
E T T I N G S
Each SmartApplet has its own settings, which you set in AlphaSmart
Manager. (Some of these settings are also available on the NEO itself in the
Control Panel. Some settings are different in the two locations.)
The number of settings for each SmartApplet varies. AlphaWord Plus, for
example, has several settings; other SmartApplets have only one.
Follow the steps below to change the settings for SmartApplets on the
connected NEO(s).
If you have a SmartOption Mobile Lab connected to your computer, you can
only change settings for SmartApplets that are installed on all connected
NEOs or that you have just chosen to install on the connected NEOs. Only
these SmartApplets are listed in the Settings list. This can be especially
important if you are using a mixed SmartOption Mobile Lab because
SmartApplets that are for NEO 2 only (such as the Accelerated Reader and
Responder SmartApplets) are not listed if NEO 1 laptops are connected as
well as NEO 2 laptops. Disconnect the NEO 1 laptops if you want to change
settings for NEO 2 SmartApplets.
1. In AlphaSmart Manager, click the Settings tab.
2. Click the SmartApplet in the Settings List on the left
3. Check the settings you want to change
the settings on the right. You may need to scroll to see some settings.
A
A .
; then, make your changes to
B
B
AlphaSmart Manager 2 User Manual