Chapter 8 List Subsystem; List:trigger:mode; List:state - ITech IT-M7700 Series Programming Manual

ООО "Техэнком" Контрольно-измерительные приборы и оборудование

LIST:TRIGger:MODe

Syntax
Arguments：
Query Syntax:
Returns:

LIST:STATe

Syntax
Arguments：
Query Syntax:

Chapter 8 LIST Subsystem

This command is used to set the trigger mode to run the List.
LIST:TRIGger:MODe <OFF|ON|0|1>
<OFF|ON|0|1>

Off: After the Trigger key is pressed, the instrument will automatically run
the real-time List file.

On: After the Trigger key is pressed, the instrument will run the realtime
List file in single step.
LIST:TRIGger:MODe?
<OFF|ON>
This command is used to set the state of list mode.
LIST:STATe <OFF|1-5>
<OFF | 1-5>

1 - 5: indicate that the List Mode function is enabled, and LIST1 to LIST5
file is called.

Off: indicating that the List Mode function is disabled.
LIST:STATe?
Copyright© Itech Electronic Co., Ltd.
www.tehencom.com
LIST Subsystem
58